Jump to content
Mig fixer

Wolfenstein: The Old Blood Stutter fix

By Mig fixer, in Articles and troubleshooting

Recommended Posts

Mig fixer    3

Mig fixer
Posted

Test on Intel i7 4770k 16gb Nvidia GTX 970 driver 353.62 Windows 7 pro 64bit

Wolfenstein The Old Blood Steam version

 

To fix stuttering try this settings:

 

Vsync: off (It's broken in game ,force on AMD\NVIDIA control panel)
Force triple buffer on AMD\NVIDIA control panel
Shadow buffer: 2048. 
Page frame max vr texturing: 16
subsurface scattering : OFF
 
Run on max detail , aliansing 2x  1920x1080p 60fps .
 
I hope to help

Share this post

Link to post
Share on other sites

RaTcHeT302    105

RaTcHeT302
Posted

A note under the video settings section would work better for this, it could act more as a suggestion instead.

 

You could do the same for Duke Nukem Forever, "hey you twat, this setting should be set to this if the game is running poorly, or something" v.png

 

Don't actually use what I literally said though v.png

Share this post

Link to post
Share on other sites

Mig fixer    3

Mig fixer
Posted

A note under the video settings section would work better for this, it could act more as a suggestion instead.

 

You could do the same for Duke Nukem Forever, "hey you twat, this setting should be set to this if the game is running poorly, or something" v.png

 

Don't actually use what I literally said though v.png

ok thanks!

Share this post

Link to post
Share on other sites

Mig fixer    3

Mig fixer
Posted

Are you sure it's not only vsync that's mattering?

 

Because 90% it's just that to cause stuttering

the vsync , subsurface scattering , shadow buffer,page frame, at max settings  cause stuttering and fps drop . I'm sure. Whats your configuration?

Share this post

Link to post
Share on other sites

Mirh    98

Mirh
Posted

idTech 5 and maximum settings are a very dangerous mix tbh.
Are you sure you aren't running out of VRAM? (RAM shouldn't be a problem, considering you have 16gb)
 
My configuration doesn't matter then, cause I don't have the game

Share this post

Link to post
Share on other sites

Mig fixer    3

Mig fixer
Posted

idTech 5 and maximum settings are a very dangerous mix tbh.

Are you sure you aren't running out of VRAM? (RAM shouldn't be a problem, considering you have 16gb)

 

My configuration doesn't matter then, cause I don't have the game

This game on windows 10 i can't change the graphics option.

Settings: full hd 60hz max quality Shadow buffer: 2048. Page frame vr texturing: 16 , subsurface scattering : OFF.

Vram usage 2133 mb (graphic cards)

ram usage 2212 mb ,

cpu 36%

Share this post

Link to post
Share on other sites

Mirh    98

Mirh
Posted

Yeah, but this is with your "fixed" settings... There's nothing to see there if the problem doesn't present.

 

aside of the fact that if you can't change graphic options something is not right

 

Share this post

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Go To Topic Listing
  • Found PCGamingWiki useful? Please consider making a Donation or visiting our Patreon.

  • Similar Content

    • alrayes_brn
      Virtua Tennis 3 Ultrawide Fix
      By alrayes_brn
      Virtua Tennis 3 Ultrawide screen Fix
      Fixes:
      - Ultrawide and Super Ultrawide screens support (21:9, 32:9 & 32:10).
      Compatibility:
      - Works with Virtua Tennis 3 1.0 and 1.01.
      Installation:
      1. Start Config.exe found in the game directory, then click on Video Settings and change the resolution to your monitor resolution. (Make sure widescreen is checked)
      2. Extract the patcher from either 21-9, 32-9 or 32-10 folder to your desktop. (depending on your monitor aspect ratio).
      3. Launch the patcher and locate the game exe file found in the game directory.
      4. Start the game.
      Issues:
      - Menus and UI will be stretched.
      Links:
      Game article on PCGamingWiki:
      https://www.pcgamingwiki.com/wiki/Virtua_Tennis_3
      Ultrawide Benchmarks Youtube channel:
      https://www.youtube.com/ultrawidebenchmarks
      NOTE:
      Please do NOT re-upload the fix to any other website, this fix is strictly to be downloaded from PCGamingWiki only.
    • alrayes_brn
      Dino Dini's Kick Off Revival Ultrawide Fix
      By alrayes_brn
      Dino Dini's Kick Off Revival Ultrawide screen Fix
      Fixes:
      - Ultrawide screens support (3440x1440, 2560x1080 and 3840x1600).
      Installation:
      1. Extract the patcher 3440x1440, 2560x1080 or 3840x1600 to your desktop. (depending on your monitor resolution).
      2. Launch the patcher and locate the game exe file found in the game directory.
      3. Start the game and choose your monitor resolution from the launcher.
      Issues:
      - Menus will be pillarboxed and UI will be stretched.
      Links:
      Game article on PCGamingWiki:
      https://www.pcgamingwiki.com/wiki/Dino_Dini's_Kick_Off_Revival
      Ultrawide Benchmarks Youtube channel:
      https://www.youtube.com/ultrawidebenchmarks
      NOTE:
      Please do NOT reupload the fix to any other website, this fix is strictly to be downloaded from PCGamingWiki only.
    • patrxgt
      Aliens: Colonial Marines Ultra Config
      By patrxgt
      Activates hidden graphic corrections and corrections in aliens AI.
    • alrayes_brn
      TOCA 2 Touring Cars Wide/Ultrawide Screen Fix
      By alrayes_brn
      TOCA 2 Touring Cars Wide/Ultrawide screen Fix
      Fixes:
      - Wide and ultrawide screens support (16:9, 16:10 and 21:9).
      - Loading bug which makes the game crash/freeze is fixed with the patcher.
      Compatibility:
      - The patcher only works with TOCA 2 Touring Cars version 4.1, if you don't have patch 4.1 installed please download it through the link below found in the links section.
      Installation:
      1. Extract the patcher from either 16-9, 16-10 or 21-9 folder to your desktop. (depending on your monitor aspect ratio).
      2. Launch the patcher and locate the game exe file found in the game directory Codemasters/Toca2/Game.
      3. Click on Start.
      4. Download dgVoodoo2  v2.63 or newer from the below link found in the links section.
      5. Extract the content of the zip file.
      6. Go to MS/x86 folder and copy D3D9.dll, DDraw.dll and D3Dlmm.dll.
      7. Paste the files in the game directory Codemasters/Toca2/Game.
      8. Start dgVoodoo2 by running it as administrator.
      9. Click on the "DirectX" tab and choose your monitor resolution.
      10. Click on "Apply" and exit.
      11. Start the game.
      Note: You could also force "AntiAliasing (MSAA)", anisotropic filtering and Windowed mode through dgVoodoo2.
      Issues:
      - Menus and UI will be stretched.
      Credits:
      Please note that I am NOT the one who released these fixes, all credit goes to AuToMaNiAc005 on Youtube. All I did is put all his solutions into a patcher to do it automatically instead of manually.
      Links:
      Game article on PCGamingWiki:
      https://www.pcgamingwiki.com/wiki/TOCA_2_Touring_Cars
      TOCA 2 Touring Cars patch 4.1:
      http://www.patches-scrolls.com/dl.php?file=toca2p41.zip
      dgVoodoo 2:
      http://dege.freeweb.hu/dgVoodoo2/dgVoodoo2.html
      AuToMaNiAc005 manual steps:
      https://www.youtube.com/watch?v=-v0f3-jXjqo
      Ultrawide Benchmarks Youtube channel:
      https://www.youtube.com/ultrawidebenchmarks
      NOTE:
      Please do NOT reupload the fix to any other website, this fix is strictly to be downloaded from PCGamingWiki only.
    • JeffRuLz0
      Toy Story Fix
      By JeffRuLz0
      This is a modified exe for Toy Story that fixes the "Unable to link to KERNEL32.DLL!" error on newer versions of Windows.
      This was not made by me.

  • Who's Online   2 Members, 0 Anonymous, 226 Guests (See full list)

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    1,401
    Total Topics
    7,587
    Total Posts
×
×
  • Create New...