Jump to content

Xbox One Controller Fix for Assassin's Creed: Director's Cut and Assassin's Creed II (AC1&2) 1.0.0


About This File

Configuration files for x360ce to enable support for Xbox One controllers in Assassin's Creed Director's Cut and Assassin's Creed II, including vibration.

This is a more up-to-date version of the AC1 and 2 fix that improves compatibility with the latest build of x360ce (3.2.10.82) and Xbox One controllers.

To install simply download and extract the contents of the zip file into the game's installation folder.

x360ce is not required for the fix to function but is useful should you wish to make any configuration changes. Download the 32-bit (x86) version here and extract it to the same location as the other two files.

Known issues: Fix does not support simulatenous trigger inputs. To workaround this issue disable "hold to lock" in the game's options menu (disabled by default). This issue only affects AC1 as AC2 does not appear to support "hold to lock" on PC.

AC1-2-Xbox-One-Controller-Fix.zip




User Feedback

Recommended Comments

Hey, thx for the fix! I've found only one weird thing about it - i can't hold both LT and RT, so normal fighting is imposible. Do you have any suggestions about it? Maybe it is something i do wrong...

UPD: i've solved this issue by disabling "Hold to target lock" option.

Share this comment


Link to comment
Share on other sites

How did you fix the LT and RT issue ?]

Final Edit: download X360ce, go to the controller setings tab, select the preset with the SID C2685BA2, and click load.

Edit: tried a few things  i used this google link https://drive.google.com/file/d/0B7bMzcSq8aMAVUNwYWlSTzBCXzg/view and followed the instructions in this video. used x360ce and recorded the LT and RT and it worked perfectly. I put all the files from the google doc too since they might end up deleted. use the xinputhid.inf

Edit 2: after doing the fix my controller was no longer detected in For Honor. Using this fix might make the controller unrecognizable to other games.  respond

 

FW_ACC_00U.bin mt7612us.cat mt7612us.inf mt7612us.sys wdfcoinstaller01011.dll xboxgip.cat xboxgip.sys xboxgip_prot.inf xinputhid.cat xinputhid.inf xinputhid.sys

Share this comment


Link to comment
Share on other sites
On 3/18/2020 at 3:21 PM, lazybuzzooka said:

Hey, thx for the fix! I've found only one weird thing about it - i can't hold both LT and RT, so normal fighting is imposible. Do you have any suggestions about it? Maybe it is something i do wrong...

UPD: i've solved this issue by disabling "Hold to target lock" option.

Thank you for alerting me to this issue and for providing a workaround. I have updated the description to include a note about this issue. Unfortunately that's all I can do for now as I'm unsure how to fix it.

Share this comment


Link to comment
Share on other sites

Hey I have an issue. I copied the downloaded files into the game folder and launched the game. I can see the changed bindings in the controls but my controller isn't working anymore. Any ideas? do i need to download x360ce?

Share this comment


Link to comment
Share on other sites

It works but does not let me rebind left and right trigger.

Edit:

Just tried the old file from 2012 and it works flawlessly. Everything was even pre-bound to the correct keys.

Share this comment


Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
  • Found PCGamingWiki useful? Please consider making a Donation or visiting our Patreon.
  • Similar Content

    • By lukasthywalls
      In Martian Gothic: Unification, the ending video (<path-to-game>\data\outro.bik) can be corrupted. The other videos aren't. If it is, when it should play the game crash. The used game installation was fully updated with all the available patches.
      Can be tested if it's corrupted using the last RAD Video Tools/Bink and Smacker (Actually Bink 2021.3/Smacker 4.2e) and trying to playing it. If its corrupted it should play with big greens and blues squares as the screenshot. Also MPC-HC doesn't play the video (only the audio) but VLC plays it normally.
      It seems it's about of using a different encoding than the others videos, which doesn't match the binkw32.dll bundled with the game. The game seems to be using Bink compatible with RAD Video Tools 1.0e (which is the one available when this game was launched), and the video is created with 0.8 or below, or a higher version.
      So the attached video is the same video reencoded with Rad Video Tools 1.0e. To fix the video, change the original file in <path-to-game>\data\outro.bik with this one.
      No need to point it out, but this is the ending and it has spoilers, although not the big ones.
    • By Blackbird
      This restores the cut voicelines of hero units in the mission Hollywood and Vain which were cut by patch 1.01
       
      Copy the rulesmd.ini file to the root folder.
    • By scottvordem
      Note: After applying the fix, Hardware acceleration and Allow EAX effects will still be greyed out in UruSetup.exe, however those settings no longer apply as this bypasses those settings to be forced on after the game has started.
      This fix allows Hardware Acceleration and EAX to be enabled on modern systems using DSOAL, OpenAL Soft, or Creative ALchemy in URU: Complete Chronicles. Works on GOG version and should work with other versions also.
      Source: https://airtable.com/shrtTsUtiAJQ7wFGI/tblNOTdmp5nHXfFGU/viwjDPuKOjBnIQunv/rec5DHnTjpYhRzdWQ
       
      ==Installation==
      1. Extract files to <path to game>  and overwrite existing files.
      2. Set both files (plClientSetup.cfg and audio.ini) to read-only (right click each file --> properties --> check read-only --> click Apply and ok)
       
      ==details==
      plClientSetup.cfg forces the audio device to be Generic Hardware by adding Audio.SetDeviceName "Generic Hardware" and has Audio.UseHardware and Audio.UseEAX set to true.
      Audio.ini has Audio.UseHardware and Audio.UseEAX set to true.
    • By AlphaYellow
      Fixes a lot of things in Max Payne 2: The Fall of Max Payne.
      Read the provided ReadMe file for detailed instructions and its features.
      Credits: The Eddo, VGames, The_Silver
      Password: pcgw
    • By yoorrik
      Widescreen & Multiplayer for Contract J.A.C.K
      -----------------------------------------------
      - Supports monitor aspect ratio 16:9, 16:10 and resolution up to 1920x1080.
      - change Field of View FOV 95 / FOV 110.
      - Fix by Spawn for Multiplayer / Dedicated server for playing online (GameSpy.dll file)
      - Fix by B.Vorontsov for comfortable play on Windows 10 (d3d8.dll file)
      - Fix "Catastrophic failure" error for Windows 10
      ****************************
      WARNING!
      After setting a new resolution using WideScreenFix_CJ Do not open the Display menu in the game!
      Otherwise, geometric distortions will occur and you will have to restart the game.
      ****************************
      Installation.
      --------------
      1. Before installing, upgrade the game Contract J.A.C.K. up to version 1.1.
      2. Install the latest Official DirectX version (June 2010) https://www.download3k.com/Install-DirectX-Redistributable.html
      3. In the properties of the game shortcut, specify compatibility with Windows XP SP3 and specify the launch from the Administrator:
         ContractJACK Shortcut -> Right Mouse Button -> Properties -> Compatibility -> Run the program in compatibility mode with Windows XP SP3 -> Run the program as Administrator
      4. Run WideScreenFix_CJ.exe, Select FOV, select the aspect ratio and resolution of your display.
         The widescreen patch WideScreenFix_CJ will be automatically installed into your game on the way from the Registry.
         NOTE
         If the automatic installation of WideScreenFix_CJ.exe does not work, then copy all files from the "Files_for_Manual_installation" folder to the game folder.
         Then follow the instructions "Self-installation WideScreenFix_CJ" (see at the end of the text).
      5. Adjusting mouse parameters For smooth play and accurate shooting (see picture):
         Settings -> Controls -> Mouse -> Mouse sensitivity -> minimum
         Settings -> Controls -> Mouse -> Mouse Smoothing -> Maximum
      6. How to play over the Internet and how to create a game server read in the "Fix Multiplayer" folder
      7. How to install stable FPS for the display on Windows 10 read in the "Fix for Windows 10" folder
      8. How to fix the error "Catastrophic failure" for Windows 10 read in the "Fix Catastrophic failure error" folder

      Unistall
      ----------
      Reinstall WideScreenFix_CJ in Restore to Default mode.
         
      Known BUGS & SOLUTIONS
      -------------------------
      Unzip and read file "readme_WideScreenCJ.txt"
      Original here
      https://www.moddb.com/games/contract-jack/downloads/widescreen-support-for-contract-jack
       
  • Who's Online   3 Members, 0 Anonymous, 267 Guests (See full list)

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Member Statistics

    6,745
    Total Members
    3,870
    Most Online
    abrambrown
    Newest Member
    abrambrown
    Joined
×
×
  • Create New...