Jump to content

PCGamingWiki will soon migrate to a Single Sign On (SSO) system to bridge Wiki and Forum accounts, please read our FAQ.

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Found PCGamingWiki useful? Please consider making a Donation or visiting our Patreon.
  • Similar Content

    • By capofantasma97
      Hi,
      I've noticed that in a few articles there are bad commands/arguments for Launch Options and Console commands. These have been copypasted all over the internet since the dawn of Source engine tinkering, with many people improvising experts without any knowledge whatsoever.
      Here's a list of commands that should NEVER be used and even removed if present in articles. As the all-knowing wiki for PC gaming, this place should be error free, especially considering the main reason people come here is because of the will to tinker with this kind of stuff.
      -high it is not merely a matter of not being compatible with some stuff like the Origin updater, but detrimental to the overall performance. It is usually pasted because people think that setting an higher priority for the game, it will run better. In truth, High is a priority mode in Windows that is useful only for short, critical events, and processes that are not short and critical like games will cause an unbalance in resource usage with a decrease in performance. In addition, there's no visible benefit in running it, any anecdotal improvement is placebo.
      -threads the Source engine automatically detects the amount of threads it has to run, and automatically caps the threads accordingly in case it would be detrimental for performance. Furthermore, a Valve developer once replied on Reddit saying such launch option should be removed.
      - dxlevel is often wrongly used and recommended. For the best quality and optimal performance it shouldn't be used, and anyway if one wants to enforce it, the compatible and recommended values are 60, 70, 80, 81, 90, 91, 95 and 100 (some games do not support  all of these). 98 should never be used as it is a value for Xbox 360 only, as also explained in the official documentation.
      -preload / sv_forcepreload / cl_forcepreload should NEVER BE USED. Mocked by a Valve developer as "cl_massive_hitches_at_surprising_times 1", it commonly causes stuttering and lag spikes, and has been removed in many games.
      -heapsize does not exist in Source since 2009. Heapsize related commands are not to be used as not only they should be disabled basically in every Source game, but if it happens to work somewhere, it may cause long Garbage Collection pauses in the software, with clear problematic performance issues and glitches.
      Launch options and commands that affect window/fullscreen modes and resolutions like -noborder -fullscreen -w -h -full -sw are to be avoided if possible because they may cause "confusion" in the engine and create performance issues. Plus it will conflict with any changes applied in the game settings. For this kind of settings, video options in the game's settings should be the only way to interact with them. Almost all games have a selectable borderless windowed mode.
      -nocrashdialog removes some windows crash messages. It has no effect on performance and makes crashes harder to troubleshoot.
       
      There's also a series of bad network related values and commands. These should not be touched if you are not an expert. Only modern and updated config bundles like mastercomfig for Team Fortress 2 should be used to automatically apply these settings with the right values, if the game is well known to support them. For these and more settings, refer to Mastercomfig's well-researched documentation.
      rate 60000 is a bad value. The default in many Source games is 80000, so applying it will lower the rate which obviously cripples network performance even for bad connections.
      cl_interp 0.0152 causes bad interp with server,  cl_interp 0.033 is a typo of the commonly used cl_interp 0.0303
      cl_updaterate 60 and cl_cmdrate 60 are typos of cl_updaterate 66 and cl_cmdrate 66 which are the default values for most Source games as the usual tickrate for servers is 66. Some games like Apex Legends have a tickrate of 20, and these values are useless to try to enforce. Maximum tickrate is dictated by the server and doesn't give a damn of what you set.
       
      Since I'm here, I may as well give some helpful launch options:
      -novid disables the game developer/publisher startup logos/animations. It doesn't always work (like in Apex Legends).
      -nojoy and -nosteamcontroller disable the joystick system and Steam controller system respectively. If the player is certain that they will not use joysticks/controllers of any kind, these launch options are useful to reduce memory usage and improve startup times as there's 2 less modules for the game to load, as well as potentially preventing input conflicts if a controller is connected.
      -freq x , -refresh x and -refreshrate x are all the same thing but with alternative syntax names and only one should be used if need be. They enforce the refresh rate put in place of "x", which is useful for alternative refresh rates like 120, 144 and 240Hz, as the Source engine may not correctly detect the refresh rate of the monitor. Example: -freq 144
      fps_max x is a command to input in a config file but could be used as launch option as +fps_max x. It sets the maximum framerate. It can be used to prevent excessive spikes which could result in inconsistent input lag or to give more resource space to other programs in the background. Generally is recommended to not set it or set it as +fps_max 0 in order to have uncapped framerate and benefit from the lowest input lag possible, or alternatively to set it a bit above your monitor's refresh rate, like +fps_max 160 for 144Hz, in order to not waste resources and value stability more.
      m_rawinput 1 useful command if raw input can't be found or is difficult to find in the game's settings. It enables mouse raw input, meaning that the game picks the mouse sensitivity directly from the sensor of the mouse itself instead of passing through Windows's sensitivity settings, meaning that it will always give a true 1:1 consistent sensitivity and lower input lag.
       
      Please add in Source games a section explaining both good and bad launch options and updating the wrong ones.
    • By Mr. Doomguy
      Ho! Ho! Ho!
       
      We have approached the end of 2019 and this month has left some interesting things going on around the Linux Gaming community.
       
      Mesa 19.3 release and new features in the upcoming 20.0 version
      As predicted, Mesa 19.3 has been released in early December which marks the 1st stable release to include Valve's shader compiler for AMD called ACO, however it is not enabled by default and users are required to run with RADV_PERFTEST=aco to take advantage of it, of course on Steam ya need to put RADV_PERFTEST=aco %command% into Launch options. As a reminder, this is meant for AMD only running on GCN architecture or newer which halves the compiling time making the game less suspectible to stuttering and increase the frame rate as a bonus. Besides that it provides a support for Navi 14 based GPUs (Such as RX 5500 XT), Intel Tiger Lake support, Zink driver (OpenGL To Vulkan driver, currently supports OpenGL 2.1) which is currently in experimental state and new Vulkan extensions for both Radeon RadV and Intel ANV.
       
      New features have been announced to appear in the upcoming Mesa 20.0 which will be released in February:
      - Intel GPUs under Mesa will use Iris by default, a Gallium3D driver made by Intel themselves. Allowing you to take advantage of Gallium3D features such as the HUD and perhaps even Gallium3D Nine to run Direct3D 9 games under Wine without any translation to OpenGL, causing a boost to the frame rate.
      - OpenGL 4.6 support for RadeonSI (Open source OpenGL driver for AMD) and replacing TGS route with NIR, which results in some slight frame rate boost.
      - OpenGL Tesselation Support in Gallium3D's Software Rasterizer
      - AMD R600 GPUs will receive NIR support
      Linux 5.5 performance regression and AMDGPU's experimental GCN 1.0 support may be dropped
      Currently we are receiving Release Candidates for the upcoming stable 5.5 Linux kernel and it seems that some performance regression has been found, according to the Phoronix article this is cause by the usage of AppArmor feature presented in the kernel and a second unknown issue. If you are using Debian or Ubuntu (including even flavours such as Xubuntu, Kubuntu etc.) then it must be disabled by adding apparmor=0 into the kernel parameter. Luckily other distros such as Fedora and perhaps even ArchLinux have their kernels compiled to not use it by default.
       
      Now here's the bad news for any owner of AMD's graphics card that uses GCN 1.0 architecture, AMD might drop the experimental support for it under AMDGPU kernel driver due to the UVD video driver not being included and some occasional bugs due to lack of testing and any output from AMD themselves. Enabling the usage of AMDGPU kernel driver for GCN 1.0 required a manual change in the kernel parameter with radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 (Not required for GCN 3 and newer, as it's enabled by default) but it provided not only a frame rate boost but also a Vulkan support for GPUs which uses this architecture, the worst part is that they are unlikely to release a firmware which provides UVD video driver, but may also drop SI support from AMDGPU entirely. Valve may not like that as in their Future Work list for ACO, GFX6 lists Radeon HD 7000 series along with Radeon 200 series (Specifically 240 and 250) to have it's support added.
       
      Proton 4.11-11 release, D9VK merged with DXVK, Wine 5.0 reached into freeze mode
      Speaking of Valve, they have recently released a 10th and 11th revision of Proton 4.11 which not only includes some fixes but also:
      - Halo: Master Chief Collection is supported from the single player side, multiplayer mode uses Easy AntiCheat which Wine and Proton has yet to provide support for it (Unless EAC hasn't been updated).
      - Adds a Interger Scaling Mode which can be toggled by running the game with WINE_FULLSCREEN_INTEGER_SCALING=1
      - Updated FAudio to 19.12 and DXVK to 1.5
      Now the DXVK 1.5 is special one here, as D9VK which is a fork of DXVK that translated Direct3D 9 games to Vulkan has been merged with it, so by default DXVK currently supports D3D9, D3D10 and D3D11.
       
      From the Wine side, the Wine 5.0 development has reached into the freezing state, so for now we are getting release candidates (RC3 being the last release in this year!) which only includes bug fixes in order to be prepared for the stable release of it which may happen in February or March. This is rather important as Wine is used by Valve to create Proton, so once 5.0 gets a full stable release, then perhaps we will get Proton 5.0?
       
      Life Is Strange 2 Linux release, some NVIDIA updates, leading Vulkan dev at Feral Interactive leaves
      Folks at Feral Interactive has been busy this month and released the Linux port of Life Is Strange 2 which uses Vulkan by default, now for the bad news, their leading Vulkan dev Alex Smith has left the studio after 3 years and currently works at Sony with the PlayStation, luckily he mentioned that Feral still has some capable Vulkan devs ready to take over. Wonder if PlayStation 5 will use Vulkan?
       
      Now time for some NVIDIA news, they have released a new update for their legacy 340 driver series in order to make them work on recent distros for the upcoming 2020 and currently GNOME (one of the big desktop environments) will provide a much easier GPU switch in the 3.36 release, whereas KDE Plasma is soon to follow.
       
      The 2010s was a decade which showed some activity in terms of Linux gaming, starting from Valve providing Steam support for it in 2012 with other stores such as GOG, followed by a release of SteamOS and Steam Machine and later on this caused some companies who made only Mac ports to join in such as Feral Interactive, Aspyr Media, Virtual Programming etc. some of them made a huge progress and some of em didn't, but despite the failure of Steam Machines Valve still continues to this day to spend their time and money to make Linux more viable for gaming and even decided to use most of the open source middlewares such as SDL2, OpenAL, libavcodec, Vulkan and OpenGL in their newer games which most likely even reduced to cost of developing the game for specific platforms such as Windows, Mac, Linux, Android, iOS.
       
      Other contributions which Valve made for Linux are as follows:
      - Contributes their codes to SDL2, Vulkan, Mesa, Linux kernel
      - Working together with Codeweavers on Proton and upstream the codes to Wine
      - Open sourcing some of their projects such as OpenVR, GameNetworkingSockets, Proton, Fossilize
      - Giving contracts to specific developers such as DXVK, Feral GameMode etc. to continue their work
       
      Now let us remember that Linux Gaming wasn't born with Valve, but with Loki Software in late 90s and early 2000 which were responsible for using SDL and OpenAL which are still being used to this day, even in source ports of your favourite games.
       
      The biggest question here is, what will await in 2020?
       
      Previous Monthly Linux Gaming News
      November 2019
    • By SirYodaJedi
      This file is password protected due to possibility of false positives. Use the password pcgw to extract.
      Source: https://mega.nz/#!PIdT1aIK!mQu-qdOCBnGrOu9-hfnLhoGxIMWg040eF8OSwlK9DQo
      NOTE: This mod is not compatible with the highly recommended unofficial patches.
    • By SirYodaJedi
      This file is password protected due to possibility of false positives. Use the password pcgw to extract.
      Source: https://web.archive.org/web/20071218061808/http://www.giantswd.org/?file=2
    • By Weion
      What is this?
      This updated release removes all dependency on the mtndew.dll file - fixing the RTX crashes, while allowing players to be fully updated to 0.6.1.0
      How to Install
      Ensure that the ElDewrito Mod is fully updated to 0.6.1. If the player has used the previous version of this fix they must also download the original mtndew.dll file - which is also attached here. Go to the Game's Directory and replace the current binkw32.dll - and mtndew.dll if the player has used the previous version - with this one. File Checksum - binkw32.dll
      MD5:
      0c694d9c792d2b3e8f8290e2355c0082 SHA1:
      62a20a9ee939473d4a2cf6103a0b2c789a396c84 SHA256:
      6f8fe740ac1da92598265c02b555063821aefe55d070b92bfbc7d708dede5cd6 VirusTotal Scan: Click Here
      File Checksum - mtndew.dll
      MD5:
      496b9296239539c747347805e15d2540 SHA1:
      866ed863df44734f3661bdfa61752177bf4b33dc SHA256:
      315a443c26eed0eb229b365d7b8a6d613d061fb6ee0e806ebc7aeb5434237c71 VirusTotal Scan: Click Here
  • Who's Online   1 Member, 0 Anonymous, 251 Guests (See full list)

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    1,297
    Total Topics
    7,118
    Total Posts
×
×
  • Create New...