Jump to content

PCGamingWiki will soon migrate to a Single Sign On (SSO) system to bridge Wiki and Forum accounts, please read our FAQ.

Leaderboard


Popular Content

Showing content with the highest reputation since 08/17/2013 in Files

  1. 8 points

    Version 3.4

    11,719 downloads

    The tool removes black bars from the in-game cutscenes, cinematic cameras, shops and a number of other areas at 21:9 and wider resolutions. Since version 2.0 it also removes pillarboxing from the photo mode. Since version 3.0, it allows for custom FOV adjustment. Launch the game first, then the tool. The password for the archive is pcgw As expected from a trainer based on CE components, this tool does get falsely flagged by some anti-virus software as a trojan, while the rest correctly mark it as a "hacktool". Use the tool provided here at own risk and ideally avoid playing RDR Online without completely disabling the fix - especially the FOV hack. Tested at 2560x1080, 3840x1080 and 5760x1080. Additionally confirmed as working by two volunteers from WSGF. You can buy me a coffee here.
  2. 3 points

    Version 0.9.9

    1,710 downloads

    The tool removes black bars from the game at 21:9, 32:9, 48:9 and other wide resolutions. Download and unpack the archive using software like 7zip or PeaZip. The password is pcgw Launch the game Launch the tool Press the "Enable" key While in the game, briefly switch to the Borderless or Fullscreen mode. Use the tool to manually adjust the UI size at 32:9 and wider resolutions. Known issues: Stretched loading screens and rare FMVs. Minor UI display and alignment issues. Use the UI adjustment keys if necessary. The window mode switching requirement is also undesirable, hence the version number! Tested the latest Epic version at 2560x1080, briefly at 3840x1080, 5760x1080, 5120x2160 and 7680x1080 on a single monitor. You can buy me a coffee here.
  3. 3 points

    Version 1.4.1

    3,299 downloads

    The tool removes black bars from cutscenes, resulting in more horizontal and vertical FOV by default but also allows for custom real time FOV adjustment. Unpack the archive with software like 7zip or PeaZip - the password is pcgw Launch the game first, followed by the tool. All trainers based on CE components may trigger some anti-virus software. Tested the latest Origin version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  4. 3 points

    Version 1.0.0

    995 downloads

    Features: HOR+ FOV All supported screen resolutions are visible in the game menu Black bars removed from cut-scenes Installation: Unpack the archive Copy all files to the game folder "Stranglehold\Binaries\" Hotkeys: F5 - FOV + F6 - FOV - F7 - Default FOV In the Settings.ini file, you can change the following settings [FOV] Additional_FOV = 0.000 FOV value in degrees that will be added to current FOV
  5. 3 points

    Version 1.3.0

    6,233 downloads

    TL;DR This mod fixes various mouse and keyboard related input issues in NieR: Automata. Its features include raw mouse input for camera and aim movement, an entirely new crosshair aiming mode, non-standard bindings for dash/evade, pod auto-fire and more. Quick start guide: Extract the file xinput1_3.dll and NAIOM-GUI.exe to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\NieRAutomata" Start NAIOM-GUI.exe and set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Features The NieR: Automata Input Overhaul Mod (NAIOM) aims to solve all keyboard and mouse related issues in the game. As many other rough PC ports, NieR was primarily designed with a controller in mind and internally maps keyboard and mouse input to gamepad controls. This leads to various issue, including negative and positive mouse acceleration, as well as weird controls in certain perspectives, e.g. when aiming in side-scrolling mode. Its features include: Raw mouse input without any acceleration or smoothing Precise sensitivity configuration (calibrated for KovaaK's SensitivityMatcher) Fixed camera movement in third-person perspective New (optional) crosshair aiming mode for side-scrolling and top-down perspective New (optional) mouse cursors for menu and hacking (made by DevianArt user JulioDRai) Completely rebindable standard actions to any key or button combination including additional mouse buttons Non-standard keybindings, such as a dedicated dash/evade and pod fire toggle Full compatibility with FAR mod Instructions Supported Versions This mod is designed for the official version of NieR: Automata on Steam and might not work when used with otherwise modified executables. Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the file xinput1_3.dll and NAIOM-GUI.exe to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\NieRAutomata" Start NAIOM-GUI.exe and set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Note that even though the GUI is for configuration only and does not have to be running for the mod to work, it can be used together with the 'Reload Config' binding to adjust options of the fly. Update Perform a regular installation and just overwrite any existing files Note that an update retains all configured options unless they have actually been changed or removed in the new version. Uninstall Rename or remove the xinput1_3.dll from the folder of the game. Known Issues In the third-person view the camera might sometimes judder when it is near obstacles, such as walls. This has only partially to do with the mod, since the issue also occurs without it, but might just be more noticeable with it enabled Using the bindings of the mod does currently not change the ingame button prompts When using the new aiming mode the crosshair does currently also activate in situations where the aiming direction is fixed, e.g. in the side-scrolling flying mode The non-standard item switch bindings currently do not work as described in the tooltip when certain items are equipped The mod is currently not entirely compatible with the GeForce Experience overlay, which may not be controllable with the mouse in certain situations. However, the actual functionality can still be accessed by using the corresponding hotkeys The crosshair does currently not work in the hacking minigame and the standard mouse cursor will be shown instead Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another xinput1_3.dll automatically if it has the name xinput1_3_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a xinput1_3.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a xinput1_3_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Acknowledgments I would like to thank Kaibz for his continuous testing during the pre-release development of the mod. Without his detailed feedback and suggestions, creating the mod would have taken even longer than it already did. I also would like to thank DevianArt user JulioDRai for creating the awesome custom cursor package that is used by this mod. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions. Version History v1.3: Added (optional) custom mouse cursors for menu and hacking Added dedicated binding for opening the after clearance debug menu Fixed regular fire binding behavior when being held down Fixed hacking while remote controlling an enemy Fixed an issue with "sticky keys" after exiting a menu or dialog Fixed mouse button control in menus that occurred after hacking an enemy Fixed crash that occurred on certain systems when exiting the game v1.2: Added pattern based game version compatibility check Overhauled crosshair aiming mode to use the (hidden) mouse cursor for controlling the aim Increased crosshair aiming precision Reduced input lag of crosshair Fixed crosshair alignment in certain perspectives Fixed aiming in hacking mode Fixed a loading error that occurred on certain system configurations Fixed a bug that prevented certain clothing items to be equipped properly when pod petting was disabled Fixed a bug that prevented the mod from being loaded at all if the Steam controller mode was enabled v1.1: The dedicated dodge binding now has the same distance and duration as the double tap version v1.0: Initial public release
  6. 2 points

    Version 2.1

    8,395 downloads

    The trainers for Xbox/Microsoft and Epic game versions, and patchers for EGS and future versions remove pillarboxing (black bars) from real-time rendered cutscenes, menu and dialogue screens and offer the option to adjust FOV. Use software like PeaZip or 7zip to unpack the archives. The password is pcgw Making changes to Engine.ini to increase FOV through Y-axis calculation is no longer recommended, as it gets reset by finishers and possibly other in-game events. Make sure the config is in its default state to avoid unexpected issues. The mod does not address the cropping of the viewmodel and stretching of FMVs. In order to force unsupported resolutions, edit GameUserSettings.ini and set the ResolutionSizeX=, ResolutionSizeY=, DesiredScreenWidth=, DesiredScreenHeight= values as desired - e.g. 5760 and 1080. Getting into the settings in the game will undo the changes, so make sure to have configured the game to preference prior to editing the config. You can buy me a coffee here.
  7. 2 points

    Version 2.0

    4,495 downloads

    Option 1: Use the included aspect ratio patchers to target \BloodstainedRotN\Binaries\Win64\BloodstainedRotN-Win64-Shipping.exe within the game folder. For the Steam version, follow the steps of this guide. Option 2 (works with Game Pass): Download the included trainer and unpack it with software like PeaZip. The password is pcgw Launch the game, then the tool. Press the shown keys to remove the black bars and adjust FOV as desired. To avoid upscaling, edit %LOCALAPPDATA%\BloodstainedRotN\Saved\Config\WindowsNoEditor\GameUserSettings.ini and at the end add ResolutionSizeX=YOUR_WIDTH ResolutionSizeY=YOUR_HEIGHT and set FullscreenMode=0 Changing game settings may reset the above. Tested the latest GOG and Xbox Game Pass versions at 2560x1080, 3840x1080, 5760x1080 and 3240x2160. You can buy me a coffee here.
  8. 2 points

    115,043 downloads

    Fixed executables to increase the frame rate cap for Star Wars: The Force Unleashed - Ultimate Sith Edition and Star Wars: The Force Unleashed II. Extract the chosen cap to the installation folder, replacing the existing file when prompted.
  9. 2 points

    Version v1.0.1

    465 downloads

    TL;DR The Youngblood Tweaker (YBT) allows additional tweaking of Wolfenstein: Youngblood. This includes options to scale player and enemy damage, adjusting the amount of head bobbing, disabling various HUD elements and more. Quick start guide: Extract the file dinput8.dll to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Wolfenstein Youngblood\". Start the YoungbloodTweakerGUI.exe set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Features The Youngblood Tweaker (YBT) is a small mod that offers additional options for Wolfenstein: Youngblood. The goal is to fix issues that prevent people from enjoying the game, as well as to provide quality of life improvements. The mod is still in its infancy with very limited functionality. It may be extended and improved based on user feedback in the future. Its features include: Adjusting player and enemy damage Disabling various HUD elements, such as enemy healthbars, objective markers, minimap or the crosshair Adjusting the amount of head bobbing when moving or turning Forcing the FOV outside the range that can be set ingame Disabling rendering of the fog Instructions Supported Versions This mod is designed for the latest, fully patched versions of the game and might not work when used with older or otherwise modified executables. Steam (international version) Steam (international demo version) Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the file dinput8.dll to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Wolfenstein Youngblood\". Start the YoungbloodTweakerGUI.exe set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Note that even though the GUI is for configuration only and does not have to be running for the mod to work, it can be used together with the 'Reload Config' binding to adjust options of the fly. Update Perform a regular installation and just overwrite any existing files Note that an update retains all configured options unless they have actually been changed or removed in the new version. Uninstall Remove or rename the dinput8.dll from the folder of the game. Known Issues There are currently no known issues. Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another dinput8.dll automatically if it has the name dinput8_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a dinput8.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a dinput8_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions. Version History v1.0.1: Added support for game version 1.0.3 v1.0: Initial public release
  10. 2 points

    Version 20190621+

    1,342 downloads

    These patchers created for 2560x1080, 3440x1440, 32:9 and 5:4 resolutions will remove the black bars from the game. Unpack the archive with 7zip or similar software, then only use the patcher matching your resolution to modify the game executable. You can buy me a coffee here.
  11. 2 points

    Version 1.5

    309 downloads

    The tools for Steam and Microsoft versions of Halo: Reach remove black bars at cutscenes in real time for ultrawide, superwide and triple monitor resolutions. The password for the archives is pcgw Play the game in the Anti-Cheat Disabled mode for this to work. Launch the game first, then the tool. The tool is a trainer based on CE components that may trigger some anti-virus software. Making it into a patcher is not possible for Xbox and would be inconvenient to Steam users, as it would likely require replacing files before each launch in the anti-cheat-enabled mode. Tested the Xbox / Microsoft store version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  12. 2 points

    Version 1.0.0

    148 downloads

    Unpack the archive Copy all files to the game folder, binkw32.dll should be replaced In the Settings.ini file, you can change the following settings [FPS] Limit = 60 FPS limiter value Unlock = 0 Value - 1 disables FPS limiter To achieve better performance at high FPS, it is better to disable the internal FPS limiter of the game. Use Vsync or external FPS limiter to limit FPS. This game is designed to work at a constant speed, so you must have a stable FPS, otherwise you will notice a slowdown or acceleration of the game speed. Example for 120 FPS with Vsync or external FPS limiter [FPS] Limit = 120 Unlock = 1 Example for 144 FPS with Vsync or external FPS limiter [FPS] Limit = 144 Unlock = 1 [RESOLUTION] Width = 0 Height = 0 This setting can override game's horizontal and vertical resolution Example for 1920x1080 resolution [RESOLUTION] Width = 1920 Height = 1080 [GAMMA] ColorCorrection = 1 Value - 0 disables color correction Use this setting to get more natural colors [TEXTURES] ShadowMapSize = 1024 Increase this value to get better shadows quality 256 - min value 8192 - max value Lighting = 384 Increase this value to avoid artifacts in some cases 256 - the min value 8192 - the max value
  13. 2 points
    Farmer

    Powerslave EX fix

    Version 1

    941 downloads

    The Windows 10 Fall Creators Update introduced a bug into Powerslave EX which broke mouse control. The executable included in this archive provides a fix.
  14. 1 point

    Version 1.4.0

    218 downloads

    Unpack the applicable archive and use the tool to patch the exe in \MoonMan\Binaries\Win64\ within the main folder. This will adjust FOV to match the vertical of 16:9. The tool also aims to remove all pillarboxing except from pre-rendered cutscenes but this may come at the cost of reduced FOV in the starting cutscene. Some further cutscenes are confirmed as having more horizontal FOV but there is no way to guarantee every cutscene will display correctly without playing through the game. Tested briefly with the latest GOG version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  15. 1 point

    Version 1.0.0

    5 downloads

    A Cheat Engine script that allows to easily override game's default FOV values, written by Suicide_Machine.
  16. 1 point

    Version 1.1

    1,784 downloads

    The mod removes pillarboxing and adjusts the vertical FOV to match that of 16:9. The pre-rendered cutscenes will be unaffected. Use software like PeaZip or 7-Zip and password pcgw to unpack the 7z archive. Play through the dog customization part at the very start of the game at 16:9. Pressing alt+enter should work as well. The mod is best used with DoF off. For higher FOV at 21:9, simply use the 32:9 patcher instead. Tested the Game Pass version at 3440x1440 and 3840x1080. You can buy me a coffee here.
  17. 1 point
    Rose

    Noita ultrawide mod

    Version 1.6

    240 downloads

    Unpack the archive and put the "ultrawide" (for 21:9) or "superwide" (for 32:9) folder in "mods" within the main game folder. Launch the game and enable the mod by checking its box Quit the game Open %USERPROFILE%\AppData\LocalLow\Nolla_Games_Noita\save_shared\config.xml in a text editor and change internal_size_w="1280" to internal_size_w="1707" (for 21:9) or internal_size_w="2560" (for 32:9) Launch the game again - the mod should be working now! Tested the latest GOG version at 2560x1080, 3840x1080 and 5120x1440. You can buy me a coffee here.
  18. 1 point

    1,572 downloads

    Archive password is PCGW Black Bars FIX: Depending on aspect ratio replace AC4BFSP.exe and AC4BFMP.exe in the game folder Ultra/Super-Wide (21:9/32:9) Specific Solution & Issues Black Bars FIX: Depending on aspect ratio replace AC4BFSP.exe and AC4BFMP.exe in the game folder Eyefinity / Surround Specific Solution & Issues Forced triple wide version: Replace AC4BFSP.exe in the game folder
  19. 1 point

    Version 1.0

    49 downloads

    The tool forces the game to use the desktop resolution, removing black bars. Unlike the existing solution, it works with the Microsoft Store / Game Pass version of the game and doesn't rely on the aspect ratio bytes. Unpack the archive with software like PeaZip. The password is pcgw Launch the game first, then the tool. Press the hotkey as shown In the game, make sure to start a new game or continue, then navigate to Settings - Graphics - Resolution and switch to anything. All trainers based on CE components may trigger some anti-virus software. Tested the latest Xbox Game Pass version at 2560x1080, 3440x1440, 5760x1080 and 11520x1080. You can buy me a coffee here.
  20. 1 point

    Version 2.0.1

    1,665 downloads

    The mod previously removed pillarboxing from the gameplay and menu, letterboxing from the cutscenes and adjusted FOV at 21:9 and wider resolutions. As of update 1.028a, the game only needs FOV adjustment to compensate for the reduced vertical FOV at the cutscenes at 21:9 and wider. The tool allows for real-time FOV adjustment affecting both the cutscenes and the gameplay. As any trainer based on CE components, it may trigger some anti-virus software. Use software like 7zip or PeaZip to unpack the archive. The password is pcgw Launch the game first, followed by the tool. Enable custom FOV adjustment and tweak FOV to preference. Tested the latest Steam version at 2560x1080, 3840x1080 and 5760x1080. The game copy was generously funded by AlRayes of Ultrawide Benchmarks. You can buy me a coffee here.
  21. 1 point

    Version 1.0.0

    17 downloads

    Features: Removed the texture of black bars around the 16:9 image Installation: Unpack the archive Copy all files to the game folder "\Binaries\Win32\"
  22. 1 point
    BRR

    Gothic SystemPack

    Version 1.8

    501 downloads

    SystemPack 1.8 from https://forum.worldofplayers.de/forum/threads/1340357-Release-Gothic-½--SystemPack-(ENG-DEU) for Gothic 1 and 2. Downloaded from the Yandex link in the thread. (https://yadi.sk/d/t3SJ6DsSrU-YkQ) Yandex download limit has been exceeded and now requires an account to download. I also added gothic1_playerkit-1.08k.exe (http://www.worldofgothic.com/dl/?go=dlfile&fileid=28) and the official 1.08k patch for Gothic 1 to this archive. (http://www.worldofgothic.com/dl/?go=dlfile&fileid=10) Instructions for Gothic 1: install Gothic Patch 1.08k (GOG version is already patched), install gothic1_playerkit-1.08k.exe, install Gothic1_PlayerKit-2.8.exe, install G1Classic-SystemPack-1.8.exe. Pass: pcgw
  23. 1 point

    Version 2.0

    847 downloads

    The tools included here remove side black bars (pillarboxing) from the cutscenes and adjust FOV for parity with 16:9. The trainer is based on CE components and may trigger some anti-virus software. It allows for fully hor+ FOV adjustment. The password for its archive is pcgw The patchers allow for hor+ FOV adjustment on the horse and simultaneously hor+ and vert- while on foot and at cutscenes. Tested the latest GOG version at 2560x1080, 3840x1080 and 5760x1080. You can buy me a coffee here.
  24. 1 point

    Version 1.3.0

    760 downloads

    Changelog: 1.2: Added support for ELiTE cracked exe Bug fixes Features: Allow custom resolutions Allow 30 FPS in cutscenes Fullscreen fix for DirectX 8 on Windows 10 Increase the resolution of background screens Fix FOV (Automatic or manual) Fix map aspect ratio Disable system check Disable safe mode Disable cutscene borders Modify blur effect Patch CreateImageSurface (Enable this to improve the look of the game, but may cause some visual issues) Disable DirectX fog Wallhack (F1) Wireframe mode (F2) Invert X and Y axis (F3 and F4) Controllable gamma (F5, F6 and F7) Modify sensitivity (Page up and Page down) Use HKEY_CURRENT_USER instead of HKEY_LOCAL_MACHINE Install: 1. Copy all the files to your Silent Hill 4 install folder. 2. Configure the width and height and other options in Silent_Hill_4_PC_Fix.ini. 3. Start the game with DLLInjector.exe. Credits: dns - Silent-Hill-4-Wide-Screen-Patch WidescreenFixesPack team
  25. 1 point

    15,067 downloads

    Original file: http://steamcommunity.com/app/17300/discussions/0/864945401070748061/ This is the 64-bit binaries for Crysis. It allows the game to be run as a native 64-bit application, providing various benefits and enhancements. Instructions Extract the contents of the download to the Crysis installation folder. Run the crysis.exe file in the newly added folder (Bin64) to play the game. (Optional) Create a shortcut of the EXE for the Desktop for easier access. For the Steam version, there is a way to make the Steam client launch the 64-bit version by default. In the Crysis installation folder, rename the Bin32 folder to Bin32.bak and rename the Bin64 folder to Bin32.
  26. 1 point

    Version 1.0.1

    30 downloads

    Fixes the black borders to extend the viewport for widescreen made for Flawless Widescreen. SLW Fix.zip
  27. 1 point

    Version 1.1.1

    101 downloads

    Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which will remove the black bars.
  28. 1 point

    Version (game version 0.0.4)

    181 downloads

    Unpack the applicable archive and use the tool to patch the exe in \DevilsHuntUnreal\Binaries\Win64\ within the main folder. This will remove the pillarboxing from the gameplay, menu screens and cutscenes. Tested with the latest GOG version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  29. 1 point

    Version 0.3

    4,693 downloads

    What is this? This mod allows additional tweaking of Wolfenstein II: The New Colossus. This includes options to adjust the amount of head bobbing, forcing a dot reticle and disable the rendering of fog. Overview Description The New Colossus Tweaker (NCT) is a small mod that offers additional options for Wolfenstein II: The New Colossus. The goal is to fix issues that prevent people from enjoying the game, as well as to provide quality of life improvements. The mod is still in its infancy with very limited functionality. It may be extended and improved based on user feedback in the future. Features Adjust the amount of head bobbing when moving or turning Force the game to always use the dot crosshair regardless of the current weapon Disable rendering of fog Instructions Supported Versions Important: This fix relies on the latest, fully patched executables of the supported versions. Older versions or ones that otherwise have been tempered with might not work. Steam (uncut version) Steam (German version) Install The mod does not make any permanent changes to the system, the game or the configuration of the game and can easily be removed (see below). Extract the file dinput8.dll to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Wolfenstein.II.The.New.Colossus\". Start the NewColossusTweakerGUI.exe to configure the mod as desired Start the game like you would normally, for example directly through Steam A few additional notes on the installation: See Loading Other Fixes/Mods/Injectors for information on how to use the mod with another fix, mod or injector that uses a DLL file with the same name. You should hear a tweaker loaded message on game launch when the mod was loaded. This sound can be turned off in the config The GUI requires the Microsoft .NET Framework 4.6.1 and the Microsoft Visual C++ 2015 Redistributable package; both of which should already be installed on most systems. If you are having problems starting the program, you can download the required versions here and here Uninstall Remove or rename the dinput8.dll from the folder of the game. Loading Other Fixes/Mods/Injectors To increase the compatibility with other fixes, mods or injectors that are also using a dinput8.dll, this fix offers a remote loading feature of additional DLLs. This can be done in two ways: File method: The fix DLL will automatically load a DLL that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote.dll. Just rename the DLL file you want to load accordingly. This is the simplest way if you only have a conflict with one additional DLL Folder method: The fix DLL will also automatically load all DLL files regardless of their name in a sub-directory that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote. Just create a folder with the corresponding name in the install directory of the fix. This is the only way to load multiple (conflicting) DLLs Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. Configuration Although the configuration using the GUI should be easy and straight-forward, there are some things to note: The GUI provides tooltips with additional information about a setting You can change settings while in the game by using the Reload Config binding. Just change the settings in the GUI as necessary, press save and then use the binding to reload the config in-game. You should hear a tweaker reloaded sound message when the reloading was successful Additional Information What You Should Know Since the mod consists of an executable DLL-File, I could have put any harmful shenanigans in there. You just have to trust me that the file is clean. If you do not -- and why should you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. Be aware however, that because the fix uses "hacking techniques" such as injection and hooking, it could trigger anti-virus software without being harmful. Known Issues Adjusting the amount of head bobbing can lead to glitches with the camera in certain situations. This includes issues with the war map, as well as unexpected turns when crawling with the constrictor. Use the corresponding toggle binding to temporarily disable the bob scaling when necessary. Contact And Support If you like this mod and want to support the development or show your appreciation, you can find more information on my website. There you can also find out more about other fixes that I have done and means to contact me if you have a question, want to provide feedback, bug reports or suggestions.
  30. 1 point

    Version August 2019

    14 downloads

    Unpack the archive and put the modified file in \Never_Alone_Data\Managed\ within the main game folder, replacing the original. This should remove the pillarboxing (black bars) from every place. Keep in mind that it also leads to the in-game videos getting vert- (cropped). All of them can be skipped and watched again from the menu at any time, so simply setting the game resolution to 1920x1080 to do so is an option. Tested with the latest Steam version at 2560x1080. You can buy me a coffee here.
  31. 1 point

    Version 3709.4

    747 downloads

    Download the archive, unpack it with 7zip or similar software, then point the patcher matching your aspect ratio at \TSCGame\Binaries\Win64\TSCGame-Win64-Shipping.exe within the game folder. This will match the FOV to the default 16:9 vertical value and remove the pillarboxing from the dialogue scenes. Tested at 2560x1080, 3440x1440, 3840x1080 and 5760x1080.
  32. 1 point

    Version 2

    646 downloads

    Without the patcher, black bars display for ultrawidescreen displays. Instructions: 1. Extract the file using 7-Zip: https://www.7-zip.org/ 2. Copy the corresponding resolution patcher 3. Paste the patcher inside the Steam installation folder of Devil May Cry 5 (<Steam-folder>/steamapps/Devil May Cry 5) 4. Run patcher, press Start and then press OK. 5. Select the correct resolution in-game. Source: http://www.wsgf.org/forums/viewtopic.php?f=95&amp;t=33038&amp;start=30 Note: the hosted version is the 'steam' version of the patcher, not the Denuvo-free version which is hosted on WSGF.
  33. 1 point

    Version 1.0.0

    167 downloads

    This shader hack I've made disables the annoying top and bottom black bars shown during intro dialogues and other cutscenes. Just extract the files to the bin folder, where the game executable is located.
  34. 1 point
    Keith

    Split/Second 60 FPS Patch

    Version 1.0.0

    2,260 downloads

    Split/Second patch that removes the 30 FPS limiter and enables the game to run at 60 Hz; it also fixes physics to ensure physics and power plays work. Created by ducon2016. Run NoobPatcher.exe Select the unpatched (original) .exe Select "SplitSecond.NoobDiff" Wait for the file to get patched Run the newly created patched .exe
  35. 1 point

    Version 1.2

    14,429 downloads

    What is this? This fix makes Metro 2033 Redux and Metro Last Light Redux use raw mouse input to solve the issue of different sensitivities for horizontal and vertical movement. It also changes the sensitivity range to more reasonable values. It is easy to install and use and does not require any external configuration. Overview Description Even though the mouse input in Metro 2033 Redux and Metro Last Light Redux is quite good, both games apply different sensitivities for vertical and horizontal movement. They also have sensitivity settings that are too high for some players who prefer slower movement. This fix removes these problems by acquiring raw mouse input and injecting it directly into the game's input function. Features Raw mouse input Same sensitivity in all directions More reasonable sensitivity range No additional smoothing or positive/negative mouse acceleration Configuration via the ingame settings as usual Simple installation and usage without any external configuration Instructions Supported Versions Important: This fix relies on the latest, fully patched executables of the supported versions. Older versions or ones that otherwise have been tempered with might not work. The fix supports the following versions of Metro 2033 Redux and Metro Last Light Redux: Steam/Retail GOG Install The fix does not make any permanent changes to the game or the system and can easily be removed (see below). Extract the file dinput8.dll to your main game folder*. For example: "C:\Program Files (x86)\Steam\steamapps\common\Metro 2033 Redux\" Start the game like you would normally, for example directly through Steam or GOG Galaxy See Loading Other Fixes/Mods/Injectors* for information on how to use the fix with another fix, mod or injector that uses a DLL file with the same name. Uninstall Remove or rename the dinput8.dll from the folder of the game. How To Use After the installation the fix does not require any additional treatment. Just launch and configure the game as usual. Loading Other Fixes/Mods/Injectors To increase the compatibility with other fixes, mods or injectors that are also using a dinput8.dll, this fix offers a remote loading feature of additional DLLs. This can be done in two ways: File method: The fix DLL will automatically load a DLL that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote.dll. Just rename the DLL file you want to load accordingly. This is the simplest way if you only have a conflict with one additional DLL Folder method: The fix DLL will also automatically load all DLL files regardless of their name in a sub-directory that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote. Just create a folder with the corresponding name in the install directory of the fix. This is the only way to load multiple (conflicting) DLLs Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. Additional Information What You Should Know This fix is essentially a hack and relies on the layout of the specific executable. There may be crashes or unexpected issues. Feel free to provide feedback so that the problems can get fixed. Since the fix consists of an executable DLL-File, I could have put any harmful shenanigans in there. You just have to trust me that the file is clean. If you don't -- and why should you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. Be aware however, that because the fix uses "hacking techniques" such as injection and hooking, it could trigger anti-virus software without being harmful. Known Issues There are currently no known issues with the fix. Acknowledgments I would like to thank Magmarock (Steam/gog), who requested this fix and supported the development. Contact And Support If you like this fix and want to support the development or show your appreciation, you can find more information on my website. There you can also find out more about other fixes that I have done and means to contact me if you have a question, want to provide feedback, bug reports or suggestions.
  36. 1 point

    Version 1.0.0

    1,564 downloads

    Unofficial Settings configuration tool for Sonic Heroes. It's faster than the default launcher and comes with options for 720p, 1080p and 4K, in 16:9 widescreen, and comes with Xinput support pre-configured.
  37. 1 point

    Version 1.01

    338 downloads

    The Dark Tide is arguably the most popular campaign mod for Star Wars: Dark Forces. These archives contain all known "official" content related to the mod. Episodes 1-4 are the main campaign, and require Dark Forces to run. DarkXL is also supported, although not required. Beyond the Ancient is the bonus material released after Episode 4. It contains scrapped content from Episode 5, and even has some playable levels. Twilight on Tatooine is a multiplayer map for Jedi Academy, and as such requires Jedi Academy to run. It is inspired by the second episode, and includes compositions from the mod intermixed with music from the classic trilogy and Shadows of the Empire. The soundtrack was unfortunately only released for the first two episodes. Nonetheless, it was released in General MIDI format, so I have converted it to Apple Lossless using an SC-55 soundfont and properly tagged it (I recommend dBpoweramp if you need FLACs). The original .mid files are also included, as well as the nice track from Twilight on Tatooine. Originally downloaded from df-21.net.
  38. 1 point

    Version v1.1

    4,611 downloads

    TL;DR This mod allows you to change the FPS limit to above 60, fix texture issues on modern hardware, adjust the despawn time of corpses, change the FOV, skip intro videos and force custom display resolutions. Quick start guide: Extract the zip-file to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Quake 4" Use the Quake4TweakerGUI to change the settings as desired Start the game like you would normally, for example directly through Steam Features The Quake 4 Tweaker is a utility mod for Quake 4 that offers various fixes and additional options for the game. It is easy to install and comes with a GUI for convenient configuration. Its features include: Properly adjusting the FPS limit to above 60 (e.g. to 144) Fixing texture bugs on modern hardware by forcing high image quality Adjusting the despawn time of corpses Changing the field of view Skipping of the intro videos Forcing the game to use a custom resolution Instructions Supported Versions This mod is designed for the latest, fully patched versions of Quake 4 and might not work when used with older or otherwise modified executables. Steam v1.4.2 Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the zip-file to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Quake 4" Use the Quake4TweakerGUI to change the settings as desired Start the game like you would normally, for example directly through Steam Note that the GUI is for configuration only and does not have to be running for the mod to work. Uninstall Rename or remove the dinput.dll from the folder of the game. Known Issues There are currently no known issues with the mod. Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another dinput.dll automatically if it has the name dinput_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a dinput.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a dinput_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions.
  39. 1 point

    Version 1.0

    6,610 downloads

    What is this? This fix lets you change the FOV of the singleplayer campaign, including the size of the weapon model. It is simple to install and use and comes with a GUI for easy configuration. Overview Description Despite being a decent PC version, the singleplayer of Modern Warfare Remastered lacks the option to set the FOV. Even though the default FOV is not as horrible as in other Call of Duty games, it still makes the campaign unpleasant or outright unplayable for some people. This fix aims to fix this issue by providing an easy and convenient way to set the FOV for the game. Features Option to set the vertical FOV to almost arbitrary values Option to set the FOV scale of the weapon model Simple to install and use Easy to configure via a GUI and ingame bindings Important: This fix is specifically designed for the singleplayer campaign and will not work with the multiplayer version Instructions Supported Versions Steam Important: This fix relies on the layout of the executable. Although it uses techniques to make it more robust to modifications of the game, it might have to be updated when the game is patched Install The fix does not make any permanent changes to the system, the game or the configuration of the game and can easily be removed (see below). Extract the XInput1_3.dll and the MWRSPFovFixGUI.exe files to the main folder of the game. For example "C:\Program Files (x86)\Steam\steamapps\common\Call of Duty Modern Warfare Remastered\" Start the MWRSPFovFixGUI.exe to configure the fix as desired Start the game like you would normally, for example directly through Steam or Big Picture mode A few additional notes on the installation: You should hear a FOV Fix loaded message on game launch when the fix was loaded. This sound can be turned off in the config The GUI requires the Microsoft .NET Framework 4.6.1 and the Microsoft Visual C++ 2015 Redistributable package; both of which should already be installed on most systems. If you are having problems starting the program, you can download the required versions here and here Uninstall Remove the XInput1_3.dll from the game's main folder. Configuration To configure the fix you can use the GUI application. Remember that you can hover over almost any option with the mouse to get an explanatory tooltip. There are two FOV settings. The vertical FOV Base and the FOV Weapon Scale factor. The effective FOV is calculated by multiplying these two values. The scaling factor also affects the way the weapon is displayed in addition to the camera. By default the game uses a base FOV of 65.0 and a weapon scaling of 1.0. For a 16:9 27 inch display I am using a FOV Base of 66.0 and a FOV Weapon Scale of 1.15. Note that the settings can also be adjusted while in the game by using the corresponding keybindings. Additional Information What You Should Know Since the fix consists of an executable DLL-File, I could have put any harmful shenanigans in there. You just have to trust me that the file is clean. If you don't -- and why should you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. Be aware however, that because the fix uses "hacking techniques" such as injection and hooking, it could trigger anti-virus software without being harmful. Known Issues There are currently no known issues with the fix. Contact And Support If you like this fix and want to support the development or show your appreciation, you can find more information on my website. There you can also find out more about other fixes that I have done and means to contact me if you have a question, want to provide feedback, bug reports or suggestions.
  40. 1 point
    Garrett

    OpenAL

    Version 2.1.0.0

    26,319 downloads

    OpenAL 2.1.0.0 extracted from a Creative driver installer. This is an official update and is newer than the version on Creative's site. Games that include OpenAL32.dll will not use the updated file unless you delete or replace the game's own version to make it see the new one instead.
  41. 1 point
    Jenya

    Crysis POM+AF mod

    2,581 downloads

    Crysis POM AF mod by Xzero. This mod allows the engine to use AF and POM at the same time. Taken from: http://www.crymod.com/thread.php?threadid=57274&threadview=0&hilight=&hilightuser=0&page=1
  42. 1 point
    Beastman95

    dgVoodoo 2

    Version 2.54

    28,645 downloads

    Original file: http://dege.freeweb.hu/dgVoodoo2.html dgVoodoo 2 is a wrapper for old graphics API's for Windows Vista/7/8/10. This wrapper uses Direct3D 11 at GPU feature level 10.1 as wrapping output.
  43. 1 point

    218 downloads

    This is a mirror of unofficial music, sound & re-localization patch by Devisraad. Original can be found here: http://www.devisraad.com/op-m/
  44. 1 point

    1,650 downloads

    About This patch is intended to solve certain issues that occur on modern systems, related to game's usage of ancient DirectX APIs. It also enables the game to run via dgVoodoo DirectX wrapper. The main goal of this patch was to get the game running properly on all machines I have at home, which have graphics cards of all popular vendors (NVIDIA, AMD and Intel) and running Windows 10. The following changes have been implemented: Pass DDCREATE_EMULATIONONLY for DirectDraw objects used for intro cinematics, prevents the Fatal error message on startup or black screen during cinematics, depending on graphics drivers. Call SetAppCompatData(12, 0) in ddraw.dll to disable maximized windowed mode on Windows 8 and above, allows the game to run in real fullscreen mode on those systems and restores ability to change gamma with F2 and F3 keys. Delay execution of DllMain logic of rendering libraries to the point when the LoadLibrary call returns (startup hang prevention and dgVoodoo compatibility). Included registry fix which disables Windows' interfering with the game, launcher. This interference can make the game crash or not start when ran through launcher under certain circumstances. Installation Files in this archive were tested with retail version of the game, they may work with other versions, just make sure neither sft8lib.dll, D3D6Lib.dll or D3D7Lib.dll are present in the root game folder, the patch bundles updated ones in data\Stealth\Render and having the old ones in the root folder overriding the new ones is a recipe for disaster. It's also recommended to setup the game to use dgVoodoo 2 wrapper for the best experience, though it's not mandatory. Extract the contents of Soulbringer folder into your own, overwriting original files. Apply Disable_Soulbringer_Compat_Fixes.reg registry fix which takes care of launcher issues. This may not take effect until you right-click on Soulbringer.exe, go to compatibility tab and click OK to cause Windows to register new settings. If you're not going to use dgVoodoo with the game, you should set Reduced color mode (8-bit) on all game executables' Compatibility tab (Soulbringer.exe, SoulbringeVC.exe, SoulbringeVCnoeax.exe), it won't actually downgrade the colors, but it allows for rendering modes enumeration to work properly. This is only needed on Windows 8 and above. If you want software mode to not have garbled colors without dgVoodoo, apply Soulbringer_Palette_Fix_x86.reg (32-bit Windows) or Soulbringer_Palette_Fix_x64.reg (64-bit Windows). Note that the software mode doesn't work on Windows 8 and above without dgVoodoo. Launch Soulbringer, click Video, make sure any DX6 option is selected then choose the desired game resolution. The ones with 4:3 aspect ratio are the best given that game can't deal with wider aspect ratios. Other modes can work, but run too fast without forcing VSYNC (60 Hz) or capping frame-rate to 60 FPS. Click Advanced and make sure the EAX option is disabled unless you're sure you have a working setup that supports running DirectSound3D games with EAX effects and EAX Unified is installed. Additional notes There is a strange issue with game on Windows 8 and above, it doesn't pick up on all rendering modes unless Reduced color mode (8-bit) is selected from its Compatibility tab under Properties. When run for the very first time, it works though. It always works properly when run through dgVoodoo. Contrary to what the game ReadMe says, DX6 mode actually seems to run faster than DX7 and doesn't have the problem activating VSYNC to keep the FPS at 60. Running too fast makes the game glitchy. The downside, text is blurry, needs some sort of fix related to texel alignment, ATI specific fix is called Altertnate Pixel Centers, PixelCenter (31 00 00 00) setting in registry, no idea how to set it on application basis on today's drivers, irrevelant solution for NVIDIA and Intel, doesn't work with dgVoodoo neither. Future version of dgVoodoo may have a fix for that. With recent NVIDIA drivers, without using dgVoodoo, game may hang when tabbing out, press CTRL + ALT + DEL, then ESC to get to the desktop.
  45. 1 point

    747 downloads

    Included here are two "defaultrenderconfig.xml" files used to increase draw distances/LOD distances further without creating any drawbacks or problems as much as possible. *High - is the standard version *Extreme - pushes it even further out, but this requires more VRAM and a faster storage device (RAMDisk or SSD) to work well. I generally recommend just the high version. To use these you need the Dunia Mod tools *Extract "common.dat" in "Far Cry 3 Blood Dragon\data_win32" *Make a backup of "defaultrenderconfig.xml" in "Far Cry 3 Blood Dragon\data_win32\common\engine\settings" and change the file name of the selected version to just "defaultrenderconfig.xml" and place it in the folder above. *Rename the default "common.dat" and "common.fat" to something else to preserve it after extracting and leave it where it is. *Now take the extracted "common" folder with the replaced "defaultrenderconfig.xml" and drag it on to "Gibbed.Dunia2.Pack.exe" This will create a new "common.dat" and "common.fat" in the "\data_win32" folder *In your "GamerProfile.xml" file in "\my games\Far Cry 3 Blood Dragon\" folder make sure in your "<RenderProfile>" section that you are NOT adding or modifying anything except "<CustomQuality>" or "<Post>" otherwise some stuff will not work. (If you are interested in removing Parallax from roads, this mod includes this!)
  46. 1 point
    Mirh

    OpenAL tools

    1,153 downloads

    Include: ALCapsViewer from Creative EnumerateWin from OpenAL SDK openal-info from OpenAL Soft
  47. 1 point

    5,458 downloads

    Article: Batman: Arkham Asylum Prey in the Darkness DLC (Heart of Darkness Combat and "Hothouse Prey" Invisible Predator) maps should be present under "Downloadable Content". Under Challenge Mode, Joker should now be a selectable character. Credits to Feral Interactive for computer porting.
  48. 1 point

    Version v3

    2,550 downloads

    Author : Wobak Original file: http://www.mediafire.com/download/v2hhut4112nj9mv/Nolf2_WidescreenPatch_v3.rar Features: -Pick supported widescreen resolutions in the display menu. -Set horizontal FOV in display.cfg, vertical, menu, weapon and cutscene FOV are calculated automatically. -Splashscreen, Menus and HUD elements are scaled and positioned properly and dont stretch anymore. -Automatic crosshair scaling and manual tweaking. Previously it had a fixed resolution and didnt scale at all. Installation: 1. Put the "WidescreenPatch" folder in "Custom\Mods" in the NOLF2 directory. 2. Run the launcher, click on "Custom" and check "WidescreenPatch" 3. Start the game, go to display and select the desired resolution. 4. Open the display.cfg file. If you havent previously launched the game with the patch enabled, the lines mentioned below wont be present and you can add them manually. 5. The line "FOV" controls the horizontal FOV,you can set it however you want. For 16:9 I suggest "90.0". [optional] 6. The cutscene letterbox scales automatically, if you are unsatistfied with the size, change the "LetterboxPercent" value. 7. Open then the autoexect.cfg file. 8. The line "CrosshairSize" changes the crosshair size. 9. The Line "RightHUDPush" can be used to offset the HUD elements on the right to the edge of the screen. For 16:9 "30" is a good value. Enjoy the game! Known Problems: -With a large display width the loadingscreen text may be cut off at the side. This is due to the text being scaled with the resolution and background with the FOV. -With a larger display width Kate will freeze before walking and afterwards disappear. This is because the user was not expected to see such a wide region of the menu. -Some menu elements dont line up with the box they are supposed to be in. This is because their positions are calculated differently. That might be fixed in the future.
  49. 1 point
    Garrett

    AGEIA PhysX Engine

    Version v2.5.2

    1,751 downloads

    AGEIA PhysX v2.5.2 DLLs needed for some old games (e.g. Infernal) due to not being included in the newer NVIDIA PhysX installers. Install the regular NVIDIA PhysX System Software and NVIDIA PhysX Legacy System Software (linked on the same page), then extract this folder to the Engine folder where PhysX is installed. These files were extracted from NVIDIA PhysX System Software 8.09.04 WHQL.
  50. 1 point

    Version 5.1.2600.0

    23,821 downloads

    Microsoft DirectInput Mapper needed on Windows Vista and newer for some older games that show a DirectInput registry error or fail to remember key/button mappings. This download contains the following DLL files: Microsoft DirectInput Mapper (dimap.dll) Microsoft DirectInput Mapper Framework (diactfrm.dll) Extract somewhere temporarily and run the install batch file as an admin (right click, Run as administrator). These DLL files were extracted from a genuine Windows XP installation CD.
×
×
  • Create New...