Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 02/06/2021 in Files

  1. 2 points

    Version 1.4

    1,902 downloads

    The tools for Microsoft Store/Game Pass, Steam, GOG, and potentially other game versions remove black bars from the game at 21:9 and wider. Now with interaction icons fixed for 32:9 and 48:9. Unpack the archives with software like 7zip or PeaZip using the password pcgw Make sure the game executables are without modifications from prior fixes. Launch the game and remain in the main menu. Launch the trainer and press the button as instructed, then load a level. Keep in mind that properly enabling or disabling the fix may not be possible without reloading into a level. You can buy me a coffee or become a patron. Helifax made proper 32:9 icons possible and can be supported via PayPal - tavyhome@gmail.com
  2. 1 point

    Version 2.1

    6,551 downloads

    The tools allow for support of any display aspect ratio and real-time FOV adjustment in Death Stranding. The gameplay and engine-rendered cutscenes will properly fill the screen, while the state of the pre-rendered cutscenes will depend on the used solution. Option 1: A trainer automatically detecting any resolution and allowing to make the zoomed pre-rendered cutscenes 16:9. Left alignment of the pre-rendered cutscenes is a known issue. The tool also allows to adjust FOV at any aspect ratio. Unpack the archive - the password is pcgw Launch the game, followed by the trainer Press the desired keys - ideally from the main menu and before any cutscenes Go to Graphics Settings and select your resolution under 21:9 Option 2: The known ultrawide solution made into patchers limited to common wide resolutions and keeping the pre-rendered cutscenes zoomed. Tested the latest Steam version at 1920x1080, 2560x1080, 3440x1440, 3840x1080 and 5760x1080 (HUD is spanned). I may have been the first to discover the common sense aspect ratio change solution (as seen on the WSGF Discord), but I am certainly not the one who published the bytes first (looks like it was FasterThanFTL). As such, I am not taking any credit for the patchers but you can buy me a coffee for the trainer based on many hours of 100% unique research, calculations and code.
  3. 1 point

    860 downloads

    White gradient fix by AxeVice. Based on a fix by res0nat0r. Removes white gradient overlay. ACB_White_Gradient_Fix_2016 (for the latest game version) ACB_1_03_White_Gradient_Fix_2011 (for v1.03 released in 2011) Taken from: https://www.reddit.com/r/assassinscreed/comments/46qam6/white_gradient_fix_for_pc_players_assassins_creed/ Based on: https://www.moddb.com/downloads/assassins-creed-brotherhood-white-gradient-fix
  4. 1 point

    Version 1.0.3

    18 downloads

    Features: All supported screen resolutions are visible in the game menu HOR+ FOV Installation: Unpack the archive Copy all files to the game folder Hotkeys: F5 - FOV + F6 - FOV - F7 - Default FOV In the Fix.ini file, you can change the following settings [HUD] Stretch = 0 On/Off stretched HUD
  5. 1 point

    Version 1.0.0

    4 downloads

    Replace the files in the game's system folder with those contained in the archive Change the resolution in the game.ini file % USERPROFILE% \ Documents \ Lemony Snicket \ game.ini Example: FullscreenViewportX= 1920 FullscreenViewportY= 1080 The FOV value is set automatically (and accordingly) for every resolution, multi-monitor setup or aspect ratio.
  6. 1 point

    Version 1.0

    72 downloads

    The small patcher removes the side black bars (pillarboxing) from the game. Follow the instructions within the patcher UI to apply it. Tested the latest Epic Games Store version at 2560x1080 and briefly at 3840x1080. Wider resolutions may be affected by camera issues. The solution will not work for the Microsoft Store / Game Pass game version. You can buy me a coffee or become a patron.
  7. 1 point

    Version 1.1

    470 downloads

    The game features FMVs and rendered cutscenes that get pillarboxed at 21:9 and wider resolutions. This patcher removes the black bars from the rendered cutscenes and has no effect on the FMVs as there is no way to hack a pre-recorded video to add more content. Simply unpack the archive and patch the main game exe. Tested the latest Steam version at 2560x1080 and briefly at 5760x1080 in both DX modes. You can buy me a coffee or support me on patreon.
  8. 1 point

    Version 2.0

    536 downloads

    The patcher allows to select 21:9 and wider resolutions in the game Patch the game file as instructed by the tool. Launch the game and select your resolution in the settings to avoid stretching. (sometimes the resolution may be listed under 16:9) Tested the latest Steam version briefly at 2560x1080 and 3840x1080. You can buy me a coffee here.
  9. 1 point
    Osprey

    Warcraft Mouse Helper

    Version 1.2

    2,900 downloads

    Warcraft Mouse Helper v1.2 for Warcraft: Orcs & Humans (1994) by Blizzard Entertainment This Windows utility allows for better mouse control in Warcraft: Orcs & Humans when played in DOSBox under Windows. It runs in the background while you're playing and maps the game's built-in keyboard commands to the right and middle mouse buttons and the mouse wheel. This allows you to give context sensitive orders with the mouse buttons (like in more modern RTSes) instead of using keyboard commands or mousing over to the command bar. It also allows for clicking and dragging to select multiple units without having to hold down the Ctrl key. Finally, it allows for scrolling the map with both the mouse wheel and the WASD keys, as well as other minor convenience features. Features: * Left click and drag to draw selection boxes around multiple units without having to hold down the Ctrl key. * Right click to order units to attack or harvest/transport goods (or move, in most cases). (Can also be used when the town center is selected to build walls and cancel structure placement) * Middle click to order units to repair or explicitly move (without attacking or harvesting). (Can also be used when the town center is selected to build roads) * Middle click and hold to auto-select units and structures as you mouse over them (for quickly checking health). * Move the mouse wheel up/down/left/right to scroll around the map. (A horizontal scrolling mouse wheel and Windows Vista or later are required for scrolling left/right) * Hold Shift while scrolling down/up or use the 4th/5th mouse buttons to scroll left/right. (For mice without horizontal scrolling mouse wheels or pre-Vista machines) * Press WASD to scroll around the map (can be disabled). * Press Esc to open the game's Options menu (which, normally, requires pressing F10). * Press F6-F8 and F10-F12 a second time to toggle their functions off (rather than having to press a different key to). * Press Shift + F10 to show and hide this list. * Press Shift + F11 to toggle scrolling with WASD. * Press Shift + F12 to toggle auto-selecting units and structures while holding middle click. * Press and hold Backspace to delete characters until released (rather than needing to press it repeatedly). * Press Pause/Break to pause and un-pause the helper (disabling and re-enabling all above features). Instructions: Simply run WarcraftMouseHelper.exe and then run the game. (Optional) Create a shortcut that will run the helper and game together: 1. Click on the "Create shortcut" button on the helper's main window. 2. Drag and drop your existing shortcut onto the area at the top of the next window ..or.. Build a shortcut from scratch by selecting your DOSBox executable and, optionally, your DOSBox .conf file and game executable. (Both options will create a new shortcut that runs the helper, then DOSBox (+ the game), then exit the helper when DOSBox exits) Configuration: There are a few options that you can configure on first run, via the tray icon or via in-game hotkeys: * Whether to show the GUI window. Default: On. Applies only to running the helper by itself, not via shortcut. Toggle off to launch the helper silently to the tray. * Whether to exit when DOSBox exits. Default: On. Applies only to running the helper by itself, not via shortcut. Toggle off to leave the helper running. * Whether to enable scrolling the map with the WASD keys. Default: On. Hotkey: Shift+F11. Toggle off to have the WASD keys perform their normal command functions. * Whether to enable auto-selecting of units and structures while holding middle click. Default: On. Hotkey: Shift+F12. Toggle off if you accidentally trigger it while performing regular middle clicks. Notes: * Since right click is used for both move and harvest, peasants and peons that you try to move will automatically harvest nearby resources once they get to where you tried to move them. To avoid that, you may give an explicit move command with a middle click. * Since right click is used for both move and attack, moving a warrior to one of your own buildings or units will order him to attack it, so be careful about doing that (especially if giving orders on the minimap). To avoid that, you may give an explicit move command with a middle click. * If map scrolling is too fast or too slow, adjust "Key Scroll" in the game's Options. That applies to mouse wheel scrolling, too, since this helper simply maps the arrow keys to the mouse wheel. If it's still too fast or slow, adjust the "cycles" value in your DOSBox .conf file (ex. to 30000). * If anything doesn't work in fullscreen that works in windowed mode, try changing the "output" mode in your DOSBox .conf file. (ex. to "overlay"). Modification: This utility is simply a compiled AutoHotkey script. If you're not satisfied with the given mappings or functionality and would like to tweak them, the source script (WarcraftMouseHelper.ahk) is provided in the "src" folder. You will need to download AutoHotkey from www.autohotkey.com to compile it. In the folder where you installed/extracted AutoHotkey will be a "Compiler" folder. In there is Ahk2Exe.exe, which you can use to compile your modified WarcraftMouseHelper.ahk into a new WarcraftMouseHelper.exe. An icon for you to use is in the folder with WarcraftMouseHelper.ahk. You don't need to compile or worry about WarcraftMouseHelperFunctions.ahk (which mostly has code related to the GUI, not the game). It'll be included automatically when WarcraftMouseHelper.ahk is compiled. For help with using AutoHotkey, see the help file (AutoHotkey.chm) that comes with it. Other: If you like this utility, you may be interested in these related uploads: Dune II Mouse Helper: https://community.pcgamingwiki.com/files/file/955-dune-ii-mouse-helper/ Outlaws Mouse Helper: https://community.pcgamingwiki.com/files/file/970-outlaws-mouse-helper/ SkyNET Mouse Helper: https://community.pcgamingwiki.com/files/file/982-skynet-mouse-helper/ Tomb Raider Mouse Helper: https://community.pcgamingwiki.com/files/file/1237-tomb-raider-mouse-helper-for-tr1-5/ All (and any newer) uploads: https://community.pcgamingwiki.com/index.php?app=core&module=search&do=user_activity&search_app=downloads&mid=3342
  10. 0 points

    Version 1.03

    1,592 downloads

    Original sources: The Patches Scrolls (CS, RU, WW) This is the Assassin's Creed Brotherhood Patch v1.03 for digital download versions of the game. It is the latest version available. The patch is available in the following languages: Czech (CS) Russian (RU) Worldwide (WW) Each file is ~74 MB in size. Other versions of this patch can be found on the Assassin's Creed Brotherhood wiki page.
  11. 0 points

    Version 1.01

    2,695 downloads

    Original source: FilePlanet This is the Assassin's Creed II Patch v1.01. It is the latest version available.
×
×
  • Create New...