Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 09/30/2019 in Files

  1. 9 points

    Version 3.5

    20,068 downloads

    The tool removes black bars from the in-game cutscenes, cinematic cameras, shops and a number of other areas at 21:9 and wider resolutions. Since version 2.0 it also removes pillarboxing from the photo mode. Since version 3.0, it allows for custom FOV adjustment. Launch the game first, then the tool. The password for the archive is pcgw As expected from a trainer based on CE components, this tool does get falsely flagged by some anti-virus software as a trojan, while the rest correctly mark it as a "hacktool". Use the tool provided here at own risk and ideally avoid playing RDR Online without completely disabling the fix - especially the FOV hack. Tested at 2560x1080, 3840x1080 and 5760x1080. Additionally confirmed as working by two volunteers from WSGF. You can buy me a coffee here.
  2. 8 points

    Version 2.0.3

    1,664 downloads

    The tools allow for support of any display aspect ratio and real-time FOV adjustment in Death Stranding. The gameplay and engine-rendered cutscenes will properly fill the screen, while the state of the pre-rendered cutscenes will depend on the used solution. Option 1: A trainer automatically detecting any resolution and allowing to make the zoomed pre-rendered cutscenes 16:9. Left alignment of the pre-rendered cutscenes is a known issue. The tool also allows to adjust FOV at any aspect ratio. Unpack the archive - the password is pcgw Launch the game, followed by the trainer Press the desired keys - ideally from the main menu and before any cutscenes Go to Graphics Settings and select your resolution under 21:9 Option 2: The known ultrawide solution made into patchers limited to common wide resolutions and keeping the pre-rendered cutscenes zoomed. Tested the latest Steam version at 1920x1080, 2560x1080, 3440x1440, 3840x1080 and 5760x1080 (HUD is spanned). I may have been the first to discover the common sense aspect ratio change solution (as seen on the WSGF Discord), but I am certainly not the one who published the bytes first (looks like it was FasterThanFTL). As such, I am not taking any credit for the patchers but you can buy me a coffee for the trainer based on many hours of 100% unique research, calculations and code.
  3. 6 points

    Version 0.9.9

    10,728 downloads

    The tool removes black bars from the game at 21:9, 32:9, 48:9 and other wide resolutions. Download and unpack the archive using software like 7zip or PeaZip. The password is pcgw Launch the game Launch the tool Press the "Enable" key While in the game, briefly switch to the Borderless or Fullscreen mode. Use the tool to manually adjust the UI size at 32:9 and wider resolutions. Known issues: Stretched loading screens and rare FMVs. Minor UI display and alignment issues. Use the UI adjustment keys if necessary. The window mode switching requirement is also undesirable, hence the version number! Tested the latest Epic version at 2560x1080, briefly at 3840x1080, 5760x1080, 5120x2160 and 7680x1080 on a single monitor. You can buy me a coffee here.
  4. 4 points

    Version 4.0

    719 downloads

    The tools for Steam and Microsoft versions of Halo: Reach, Halo 2: Anniversary, Halo 3, and ODST remove black bars at cutscenes in real time for ultrawide, superwide and triple monitor resolutions. The password for the archives is pcgw Play the game in the Anti-Cheat Disabled mode for this to work. Launch the game first, then the tool. The tool is a trainer based on CE components that may trigger some anti-virus software. Making it into a patcher is not possible for Xbox and would be inconvenient to Steam users, as it would likely require replacing files before each launch in the anti-cheat-enabled mode. Tested the Xbox / Microsoft store version at 2560x1080 (all games), 3840x1080 (Halo 3, ODST) and 5760x1080 (all games). You can buy me a coffee here.
  5. 4 points

    Version 1.0.0

    1,209 downloads

    Flawless Widescreen plugin for fixing wrong aspect ratio in 32:9 and Surround/Eyefinity resolutions. - Go to "C:\Program Files (x86)\Flawless Widescreen\" and unpack the content of this archive. (If it asks about overwriting some folders, accept - it will add new files and not overwrite any existing ones.) - Start FWS and select the plugin (under Helifax section). - Enable the plugin. - Play the game. Known Issues: The MAIN MENU will be stretched (incorrect Aspect Ratio) but in-game & cinematics everything will be using correct Aspect Ratio! I can only test it in 32:9 and it works perfect! I can't test Surround/Eyfinity resolutions but it should work fine, I expect! Cheers, Helifax
  6. 3 points

    Version 1.1

    477 downloads

    The tool removes black bars from the game in real time at 32:9 and wider resolutions. Compared to the great existing WSGF solution by Helifax, it is compatible with the Game Pass / Microsoft Store version of the game, automatically sets its resolution based on that of the desktop and has no aspect ratio limitations. Unpack the archive with software like 7zip - the password is pcgw Run the game, followed by the tool Press the Enable key as shown Set the fullscreen mode to Borderless and the in-game resolution to any of the available options All tools based on CE components may trigger some anti-virus software. Tested the latest Game Pass version at 5120x1440 and 11520x1080. You can buy me a coffee here.
  7. 3 points

    Version 1.0.0

    1,630 downloads

    Features: HOR+ FOV All supported screen resolutions are visible in the game menu Black bars removed from cut-scenes Installation: Unpack the archive Copy all files to the game folder "Stranglehold\Binaries\" Hotkeys: F5 - FOV + F6 - FOV - F7 - Default FOV In the Settings.ini file, you can change the following settings [FOV] Additional_FOV = 0.000 FOV value in degrees that will be added to current FOV
  8. 3 points

    Version 1.4.1

    4,704 downloads

    The tool removes black bars from cutscenes, resulting in more horizontal and vertical FOV by default but also allows for custom real time FOV adjustment. Unpack the archive with software like 7zip or PeaZip - the password is pcgw Launch the game first, followed by the tool. All trainers based on CE components may trigger some anti-virus software. Tested the latest Origin version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  9. 3 points

    Version 1.1.1

    6,243 downloads

    Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which will remove the black bars and allow for FOV adjustment through the UI or hotkeys
  10. 2 points

    Version 2.1

    10,402 downloads

    The trainers for Xbox/Microsoft and Epic game versions, and patchers for EGS and future versions remove pillarboxing (black bars) from real-time rendered cutscenes, menu and dialogue screens and offer the option to adjust FOV. Use software like PeaZip or 7zip to unpack the archives. The password is pcgw Making changes to Engine.ini to increase FOV through Y-axis calculation is no longer recommended, as it gets reset by finishers and possibly other in-game events. Make sure the config is in its default state to avoid unexpected issues. The mod does not address the cropping of the viewmodel and stretching of FMVs. In order to force unsupported resolutions, edit GameUserSettings.ini and set the ResolutionSizeX=, ResolutionSizeY=, DesiredScreenWidth=, DesiredScreenHeight= values as desired - e.g. 5760 and 1080. Getting into the settings in the game will undo the changes, so make sure to have configured the game to preference prior to editing the config. You can buy me a coffee here.
  11. 2 points

    Version 1.5

    804 downloads

    The patchers and trainer remove pillarboxing from the game, resulting in more horizontal FOV. Some of the in-game images and cutscenes do not appear to be wide enough to fully fill the screen, but the main cutscenes, menu and gameplay become free of black bars. Use one of the patchers to modify \ChildrenOfMorta_Data\Managed\Assembly-CSharp.dll within the game folder. For the Game Pass version, use the included trainer at 21:9 - the password for the 7zip archive is pcgw. Tested briefly at 21:9, 32:9 and 48:9 in the latest GOG and Game Pass versions. Resolutions wider than 21:9 were affected by severe terrain visibility issues. You can buy me a coffee here.
  12. 2 points

    Version 1.1

    306 downloads

    The two-part solution allows to remove the black bars from the gameplay at 21:9 and 32:9 resolutions. Download and unpack the archive corresponding to your aspect ratio Run the patcher and target the file as instructed. Copy all the contents of the included folder to the main game folder (\Blasphemous\) Expect some minor visual glitches. Make sure to store and share your save files right away if you run into anything game-breaking. Keep in mind that instances of softlocks have been reported before the mod existed, but I am open to investigating any major issues as long as I have your save files. Tested the latest GOG version at 2560x1080, 3440x1440 and 3840x1080 for a few hours. You can buy me a coffee here.
  13. 2 points

    Version 1.1

    39 downloads

    The small patcher removes black bars from the game at all wide resolutions. Keep in mind that some of the textures simply do not have enough width to fill the screen, and the menu UI will become cropped the wider it gets from 21:9, although the game appears to be playable even at 48:9. Tested the latest GOG version at 2560x1080, 3440x1440, 3840x1080 and 5760x1080. You can buy me a coffee here.
  14. 2 points

    Version 1.1

    287 downloads

    The trainer displays the current FOV and allows to change it at all resolutions in real time. Unpack the archive with software like 7zip - the password is pcgw Launch the game, followed by the tool. Press the keys as instructed All trainers based on CE components may trigger some anti-virus software. Tested the latest full GOG version and the Steam demo. You can buy me a coffee here.
  15. 2 points

    Version 1.1

    2,391 downloads

    A total overhaul of the old Flawless Widescreen script for GTA V that has been dysfunctional for many months if not longer. As before, it allows for fine-tuning of FOV per each view - first person, in-vehicle, ADS, and third person. It also allows to remove the pillarboxing at cutscenes at 21:9 and wider, although having the latter enabled may cause some confirmation prompts to disappear at 32:9 and wider until disabled. Download and install Flawless Widescreen. Download this script and unpack the archive. Put its contents in the main Flawless Widescreen folder (usually \Program Files (x86)\Flawless Widescreen\). Launch Flawless Widescreen, select Grand Theft Auto V (updated) and set everything to preference. Tested the latest game version at 2560x1080, 3440x1440, 3840x1080, and 5760x1080. You can buy me a coffee.
  16. 2 points

    Version 1.0

    224 downloads

    The simple patcher removes the zoom limitations affecting ultrawide and wider resolutions. Compared to the manual solution, it does not depend on any specific aspect ratio. There is no reliable fix for the windowboxing at the cutscenes yet and I've had better results in the demo. Tested the latest full GOG version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  17. 2 points

    Version 1.0

    214 downloads

    The game features FMVs and rendered cutscenes that get pillarboxed at 21:9 and wider resolutions. This patcher removes the black bars from the rendered cutscenes and has no effect on the FMVs as there is no way to hack a pre-recorded video to add more content. Simply unpack the archive and patch the main game exe. Tested the latest Steam version at 2560x1080 and briefly at 5760x1080 in both DX modes. You can buy me a coffee or support me on patreon.
  18. 2 points

    Version 1.0.0

    664 downloads

    Complete DirectInput Force Feedback Driver for XInput - Masahiko Morii MSI pack including all versions ever released! Very rare to find nowadays. List of files xi.win7.x64.en.msi > Windows 7 x64/64bit English xi.win7.x86.en.msi > Windows 7 x86/32bit English xi.wlh.x64.en.msi > Windows Vista x64/64bit English xi.wlh.x86.en.msi > Windows Vista x86/32bit English xi.wnet.x64.en.msi > Windows XP x64/64bit English xi.wxp.x86.en.msi > Windows XP x86/32bit English xi.win7.x64.ja.msi > Windows 7 x64/64bit Japanese xi.win7.x86.ja.msi > Windows 7 x86/32bit Japanese xi.wlh.x64.ja.msi > Windows Vista x64/64bit Japanese xi.wlh.x86.ja.msi > Windows Vista x86/32bit Japanese xi.wnet.x64.ja.msi > Windows XP x64/64bit Japanese xi.wxp.x86.ja.msi > Windows XP x86/32bit Japanese
  19. 2 points

    Version 1.0.0

    75 downloads

    This is a hack by Jackfuste which allows for widescreen resolutions to display properly instead of being stretched, additionally UI elements are unstretched and sit in the corners, and other 2D elements are centered, however loading screen graphics are stretched. This fix was downloaded from this forum: https://www.wsgf.org/phpBB3/viewtopic.php?f=64&t=32562 All credit goes to Jackfuste, I am merely uploading a mirror. This was tested on a cracked retail version of the game, it is unknown if it will also work on a Windows XP system using StarForce protection.
  20. 2 points

    Version 1.0

    2,659 downloads

    The tool removes black bars at any widescreen resolution. Unlike the existing solution, it works with the Microsoft version of the game. Download and unpack the archive using software like 7zip or PeaZip. The password is pcgw Launch the game Launch the tool Press the "Enable" key While in the game, press Alt+Enter twice. Alt+Tab may work as well. Try again if unsuccessful. Tested the latest Xbox Game Pass version at 2560x1080 and briefly at 7680x1080. The latter was affected by UI issues. You can buy me a coffee here.
  21. 1 point

    7,020 downloads

    Archive password is PCGW Black Bars FIX: Depending on aspect ratio replace AC4BFSP.exe and AC4BFMP.exe in the game folder Ultra/Super-Wide (21:9/32:9) Specific Solution & Issues Black Bars FIX: Depending on aspect ratio replace AC4BFSP.exe and AC4BFMP.exe in the game folder Eyefinity / Surround Specific Solution & Issues Forced triple wide version: Replace AC4BFSP.exe in the game folder
  22. 1 point

    Version 1.0.0

    1,056 downloads

    This archive contains configuration files from the settings posted by Special K developer Kaldaien on the Special K forum. Unpack the archive Follow the setup instructions on the PCGW article for Horizon Zero Dawn Launch the game Tested on the Steam version of the game.
  23. 1 point

    Version 1.0.0

    49 downloads

    Mirrored the fixed .exe from the Mega link.
  24. 1 point

    Version 1.0.0

    31 downloads

    This mod is based on the code used in 21xMachi9 (https://github.com/KingKrouch/21xMachi9), but only modifies the Vert- FOV in Destroy All Humans. It also supports custom FOVs by modifying the config.ini file. I have plans on releasing an open sourced version once the game releases, but I figured that I'd release a seperate version of this fix soley for the demo version, as it likely won't need to be updated as often. This fix requires the GOG version of the demo to use, and isn't compatible with the Steam demo. Installation: Extract the contents of "DestroyAllVertMinus_Release_Win64.zip" into the "Destroy All Humans Demo\DH\Binaries\Win64" directory where the game is installed. NOTE: This fix requires Visual C++ Redist 2015-2019 to be installed to function properly, as this release build uses the most recent Windows SDK versions as of Visual Studio 2019. Please download and install those from here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
  25. 1 point

    Version 1.0

    224 downloads

    The tool forces the game to use the desktop resolution, removing black bars. Unlike the existing solution, it works with the Microsoft Store / Game Pass version of the game and doesn't rely on the aspect ratio bytes. Unpack the archive with software like PeaZip. The password is pcgw Launch the game first, then the tool. Press the hotkey as shown In the game, make sure to start a new game or continue, then navigate to Settings - Graphics - Resolution and switch to anything. All trainers based on CE components may trigger some anti-virus software. Tested the latest Xbox Game Pass version at 2560x1080, 3440x1440, 5760x1080 and 11520x1080. You can buy me a coffee here.
  26. 1 point

    Version v1.7

    7,606 downloads

    TL;DR This mod allows you to customize various aspects of the game, including the user interface, controls, visuals, notifications, sounds and more. It is simple to install and comes with a GUI for easy configuration. Quick start guide: Extract the files of the archive to the release sub-folder of the game. For example: "C:\Program Files (x86)\Steam\steamapps\common\Prey\Binaries\Danielle\x64\Release\" Use the PreyInterfaceCustomizerGUI to change the settings as desired Start the game like you would normally, for example directly through Steam or Big Picture mode Features The Prey Interface Customizer (PRIC) is a user experience customization mod for Prey (2017). It provides a wide variety of options to customize the UI, controls, visuals, notifications, sounds and more. Its features include: Control over the visibility of individual UI elements, including the health/armor/PSI bars, objective markers, pickup log, button tutorial prompts, item highlighting, as well as various notifications, such as objective updates Fine-grained settings, such as only disabling side-mission markers while keeping the main-mission markers visible Dynamic UI mode, which shows elements only with a hotkey instead of disabling them completely Options to disable various notifications sounds, such as enemy behavioral cues, objective updates or the ring sound for incoming audio messages Options to change the crosshair style and vertical position Options to adjust the weapon FOV or having a fixed FOV during sprinting Options to use non-standard bindings, such as scrolling through your quickbar items or directly using a medkit without having to open the spiral wheel Options to alter the interaction with screens, such as proper mouse cursor support or direct control via the attack key (aka ) Options to adjust the sensitivity scale when sprinting or zooming Option to skip the second loading screen Options to skip intro videos, disable motion blur, set the image sharpening amount or disable the crouch vignette Option to force PS4 controller prompts Easy installation and configuration via a GUI Instructions Supported Versions This mod is designed for the latest, fully patched version of Prey and the Mooncrash DLC and might not work when used with older or otherwise modified executables. Steam v1.10 GOG v1.10 Note that the mod currently does not work with the demo version of the game. Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the files of the archive to the release sub-folder of the game. For example: "C:\Program Files (x86)\Steam\steamapps\common\Prey\Binaries\Danielle\x64\Release\" Use the PreyInterfaceCustomizerGUI to change the settings as desired* Start the game like you would normally, for example directly through Steam or Big Picture mode Note that the GUI is for configuration only and does not have to be running for the mod to work. *If the GUI does not work probably, you might miss some of the requirements. See the section for details Uninstall Remove all files starting with PreyInterfaceCustomizer as well as the dinput8.dll from the release sub-folder of the game Presets The mod comes with three standard configuration presets: Default: All UI elements, notifications and sounds are enabled. This should be equivalent to the unmodded version of the game Reduced: Removes UI elements, notifications and sounds that are unnecessary or are already conveyed in other ways. Additional elements, such as objective markers are only visible in the Dynamic UI. This preset is designed in such a way that it should be usable by an observant player on the first playthrough Immersive: Removes all UI elements, notifications and sounds that are not absolutely essential to playing the game. This preset expects a certain knowledge of the game by the player and is probably not suitable for a first playthrough Note that these settings are just templates and can be adjusted as desired. Known Issues The option is currently broken and not working as intended. Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet – and I would not blame you – feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires both the Microsoft Visual C++ Redistributable 2019 and .NET Framework 4.7.1 packages to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required versions either through a recommended Windows update (Windows 7 and later) or at Microsoft here and here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another dinput8.dll automatically if it has the name dinput8_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a dinput8.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a dinput8_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Acknowledgments I would like to thank all those people who created the original file replacement UI mods for Prey. Although it is a great game, I would have certainly enjoyed it a lot less without them. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions. Version History v1.7: Added support for non-Denuvo Steam version of the game v1.6: Added support for GOG version of the game v1.5: Upgraded main game and Mooncrash support to game version v1.10 v1.4.6: Upgraded main game and Mooncrash support to game version v1.09.5 v1.4.5: Upgraded main game and Mooncrash support to game version v1.09 Removed XInput fix option since the issue was officially fixed with the last patch Adjusted the PS4 prompt option to work independently of the removed XInput fix v1.4.4: Upgraded main game and Mooncrash support to game version v1.08 v1.4.3: Upgraded Mooncrash support to game version v1.07 v1.4.2: Added non-standard binding to quick use an armor repair item Fixed various issues with non-standard keybindings in both the main game and the Mooncrash DLC Fixed sprint and zoom sensitivity scale options for Mooncrash DLC Fixed various display issues with UI elements in dynamic mode v1.4.1: Fixed a crash that occurred in some parts of the Mooncrash DLC v1.4: Upgraded the mod to game version v1.06 and added support for the Mooncrash DLC v1.3.2: Fixed a bug that caused the game to sometimes crash when using dynamic mode after a quickload Fixed a bug that caused UI elements to sometimes not be shown in dynamic mode v1.3.1: Fixed a bug that caused the status sound setting to be ignored v1.3: Settings are now applied correctly when a level is loaded for the first time within a playthrough Added option to lock the camera and enable free cursor control of interactive screens Added option to directly control interactive screens with the attack key (e.g. the left mouse button) Added options to set the sensitivity scale when sprinting or zooming Added options to change the weapon FOV or prevent FOV changes during sprinting Added option to disable the crouch vignette effect that darkens the edges of the screen when crouching Added option to set the vertical reticle/crosshair position Added option to disable reticle/crosshair entirely Updated the address system to increase the compatibility with modified versions of the game Updated the loading system to add support for remote loading of additional DLLs for increased compatibility with other mods (see Loading Other Fixes/Mods/Injectors) Updated the GUI to .NET version 4.7.1 to fix a problem where the program would crash on startup v1.2.4: Solved compatibility issue with ReShade v1.2.3: Controller movement no longer gets stuck on interactive items when using PS4 prompts v1.2.2: Added option to skip the second loading screen Added option to select what button prompts are shown when using the XInput fix v1.2.1: Fixed a loading issue that occurred on some system configurations v1.2: Completely revised the Dynamic UI system. With a few exceptions, all elements should now behave as expected when using the Dynamic UI binding Added Dynamic UI option to control the highlighting/glow of items Added Dynamic UI options to control button prompts in interaction and quick loot windows Added Dynamic UI options to control various notifications, such as objective/task updates, location discovery, item pickups and more Added sound option to control behavioral audio cues of enemies Added sound option to control the ring before an incoming audio message Added sound options to control various notifications, such as objective/task updates, location discovery, item pickups and more Added options to skip intro videos, disable motion blur and set the image sharpening amount Revised the layout of the GUI Fixed various display bugs and crashes v1.1: The repair icon option does now work correctly The mod does no longer lead to a crash when starting a new game instead of loading an existing save game Buttons bound ingame no longer become unresponsive when using a key binding of the mod v1.0: Initial public release
  27. 1 point

    Version 1.0.0

    32 downloads

    Here is an icon for Spider-man (2001) with a 512px resolution, very faithful and simple.
  28. 1 point
    KyoriAsh

    SPF2TPatch.zip

    Version 1.0.1

    9 downloads

    Compatibility fixes for issues running Super Puzzle Fighter II Turbo on Windows NT-based operating system. NOTE: Run this patch first before running installation of Super Puzzle Fighter II Turbo Extract anywhere and run SPF2TPatch.bat to apply the fix. This fix works by applying the following compatibility fixes to SETUP.exe, UNINST.EXE and W_SPF2X.EXE: Win98 Compatibility Mode (to fix registry read and write problem in Windows NT-based system) Additionally this fix also applies the following compatibility fixes to EXEC_ST.EXE: Elevate Create Process (to allow administrator priviledge)
  29. 1 point

    Version 0.14

    1,160 downloads

    This ultrawide patch for Persona 4 Golden modifies the supported resolution list to add support for your chosen ultrawide resolution and modifies the screen AR and gameplay AR to fill the screen correctly. It replaces the need to use a reshade filter to stretch the image. Tested on the Steam release of Persona 4 Golden as of 21st of June 2020. Credit and thanks to StevieCoops#6722 on the WSGF Discord for assistance and testing. How to install: Download the patcher that matches your resolution and type of UI you want. Extract the patcher exe from the zip using the password 'pcgw'. Run the patcher and click the 3 dots and find 'P4G.exe' then hit start. Known issues: Adjusting render scale above or below 100% will interfere with the UI offset. Screen filters such as the scanline-effect in the TV world will only fill the center portion of the screen. Various other visual bugs due to seeing outside of the rendered UI. Internal resolution is 16:9 (3440x1935 using the 3440x1440 patcher). Interface is misaligned for mouse interactions. Example of centered UI. Please let me know in the comments if you have any questions or issues.
  30. 1 point

    Version 2.0.1

    834 downloads

    Option 1 (patchers): Unpack the patcher archive and use the applicable tool to patch the exe in \MoonMan\Binaries\Win64\ within the main folder. This will adjust FOV to match the vertical of 16:9. The tool also aims to remove all pillarboxing except from pre-rendered cutscenes but this may come at the cost of reduced FOV in the starting cutscene. Some further cutscenes are confirmed as having more horizontal FOV but there is no way to guarantee every cutscene will display correctly without playing through the game. Option 2 (trainer, supports Microsoft Store): Unpack the trainer / Game Pass archive with software like 7zip - the password is pcgw Launch the game Launch the tool Press the black bars removal key before a cutscene and use the other buttons to adjust FOV as desired Tested the latest GOG and Microsoft Store versions at 2560x1080, 3840x1080 and 5760x1080. You can buy me a coffee here.
  31. 1 point

    Version 2.0.1

    2,791 downloads

    The mod previously removed pillarboxing from the gameplay and menu, letterboxing from the cutscenes and adjusted FOV at 21:9 and wider resolutions. As of update 1.028a, the game only needs FOV adjustment to compensate for the reduced vertical FOV at the cutscenes at 21:9 and wider. The tool allows for real-time FOV adjustment affecting both the cutscenes and the gameplay. As any trainer based on CE components, it may trigger some anti-virus software. Use software like 7zip or PeaZip to unpack the archive. The password is pcgw Launch the game first, followed by the tool. Enable custom FOV adjustment and tweak FOV to preference. Tested the latest Steam version at 2560x1080, 3840x1080 and 5760x1080. The game copy was generously funded by AlRayes of Ultrawide Benchmarks. You can buy me a coffee here.
  32. 1 point

    Version 1.2

    459 downloads

    About An ASI Loader plugin which allows Battle For Bikini Bottom Rehydrated to run on Ultrawide displays, and with even higher framerates. Setup Extract the "BFBBUW.7z" file using 7-Zip, WinRAR, or anything else that can extract these archives, and use the password "pcgw" to extract. Copy the plugins folder and dsound.dll (ASI Loader) into the "\Pineapple\Binaries\Win64" directory of where the game is installed. Make sure that the in-game resolution is set to your chosen resolution. If you are using a non-16:9 or 21:9 resolution, you will need to edit the GameUserSettings.ini (in the "Pineapple" localappdata directory) using a text editor and then relaunch the game. Note: If you don't have any other Steam library locations set up, this will likely be "C:\Program Files (x86)\Steam\SteamApps\Common\SpongeBob SquarePants Battle for Bikini Bottom - Rehydrated". If you are experiencing difficulties launching the game or changes don't apply after installing the patch, make sure to download Visual C++ 2015-2019 Redists here: https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads Source Code Source code is available here: https://github.com/KingKrouch/BFBBUW
  33. 1 point

    Version 2.0

    2,308 downloads

    These solutions for 2560x1080, 3440x1440, 32:9 and 5:4 resolutions will remove the black bars from the game. Pre-rendered cutscenes, subtitles and some of the UI elements will be stretched. Unpack the applicable archive with software like 7zip - the password is pcgw If using the trainer, make sure the game is launched before it. After applying the fixes with the hotkeys, change the display mode to fullscreen or borderless and apply. Tested the latest EGS and Steam versions at 2560x1080, 3440x1440 and 3840x1080. You can buy me a coffee here.
  34. 1 point

    Version 1.1

    889 downloads

    The patcher replaces some of the existing game resolutions with common ultrawide resolutions, allowing for extra horizontal FOV. (VERY IMPORTANT) Follow the first steps of this guide to unpack the game exe. I am not allowed to provide the instructions here. Download and unpack the archive included here, then launch the patcher Target and patch DQB2_EU.exe (English/Europe) or DQB2_AS.exe/DQB2.exe (Asia) . In the configuration tool, 1920x1080 will correspond to 2560x1080 2560x1440 will correspond to 3440x1440 3840x2160 will correspond to 3840x1080 2048x1152 will correspond to 5120x1440 Known issues: UI stretches from 16:9. Screenshots taken through Steam are at 16:9. Shadowplay and other tools can be used instead. Tested the latest full and demo Steam versions at 2560x1080, 3440x1440, 3840x1080 and briefly 5120x1440 borderless. You can buy me a coffee here.
  35. 1 point

    Version 1.0.0

    99 downloads

    Some blank MP4 videos made in OBS Studio to skip the intro videos of the 2019 Unity re-releases of DOOM and DOOM II. Simply extract the videos included in this archive from its designated folder to the *_Data\StreamingAssets folder, replacing the original video files in the process. Credit to Garret's Fable: The Lost Chapters Intro Skip for giving me the idea for this intro skip.
  36. 1 point

    Version 1.0.0

    116 downloads

    Flawless Widescreen plugin for fixing wrong aspect ratio in 32:9 and Surround/Eyefinity resolutions. This is an update for the DOOM(2016) Fix made by Hayden, which is part of FWS. (The existing plugin stopped working, so I had to redo this from scratch, after the game got updated...last year?!). - Go to "C:\Program Files (x86)\Flawless Widescreen\" and unpack the content of this archive. (If it asks about overwriting some folders, accept - it will add new files and not overwrite any existing ones.) - Start FWS and select the plugin (under Helifax section). - Enable the plugin. - Play the game. Known Issues: Has been tested only with Vulkan API. OpenGL version might not work. Some UI will still be stretched - I didn't bother to fix it... sorry! Cheers, Helifax
  37. 1 point

    Version 1.0

    32 downloads

    The tool allows for real-time FOV adjustment and contains pre-set values to match the gameplay FOV at ultrawide resolutions to the vertical of 16:9, with slight deviations at the cutscenes and fight screens. Unpack the archive with software like 7zip or PeaZip - the password is pcgw Launch the game Launch the tool Press the hotkeys to go with a preset or manually adjust FOV in real time Tested the latest Steam version kindly provided by cheswick of /r/ultrawidemasterrace at 2560x1080, 3840x1080 and 5760x1080, although the UI spanning would be very inconvenient at the latter. Please let me know whether this works in the Microsoft Store version, or tell me the process name for it. You can buy me a coffee here.
  38. 1 point

    Version 1.0

    337 downloads

    Unpack the files to the game folder so that they are next to Observation.exe to remove the cinematic letterboxing (horizontal black bars). Tested the latest version at 2560x1080 and 1680x1050 on the first and one of the last levels. Let me know in the comments if you still come across letterboxing and attach your save files so I can take a look.
  39. 1 point

    Version 1.0.1

    19 downloads

    The trainer allows for real-time FOV adjustment in the game. Unpack the archive - the password is pcgw Launch the game Launch the tool and press the keys as instructed The underlying script is built around the FOV bytes for Shantae found by czarman. For permanent changes or manual adjustment, modify the first instance of those bytes in a hex editor. Tested the latest Steam version.
  40. 1 point

    Version 1.01

    251 downloads

    This PWAD restores the red cross icons back to DOOM 64.
  41. 1 point

    Version 1.0.0

    1,645 downloads

    Password for the archives is PCGW Baseline (Widescreen) Solution & Issues To remove black bars at 16:10 resoltions, replace hollow_knight.exe in the game folder from this archive: Ultra/Super-Wide (21:9/32:9) Specific Solution & Issues Replace hollow_knight.exe in the game folder from this archive: OR HEX edit Aspect Ratio: Go to --> ...\Steam\steamapps\common\Hollow Knight\hollow_knight_Data\Managed\Assembly-CSharp.dll Look for 39 8E E3 3F and change EVERY Instance to 60 E5 18 40. Eyefinity / Surround Specific Solution & Issues Replace hollow_knight.exe in the game folder from this archive:
  42. 1 point

    329 downloads

    password = "pcgw" for usage details, visit the WSGF - http://www.wsgf.org/dr/what-remains-edith-finch/en
  43. 1 point
    Rose

    Noita ultrawide mod

    Version 1.6

    557 downloads

    Unpack the archive and put the "ultrawide" (for 21:9) or "superwide" (for 32:9) folder in "mods" within the main game folder. Launch the game and enable the mod by checking its box Quit the game Open %USERPROFILE%\AppData\LocalLow\Nolla_Games_Noita\save_shared\config.xml in a text editor and change internal_size_w="1280" to internal_size_w="1707" (for 21:9) or internal_size_w="2560" (for 32:9) Launch the game again - the mod should be working now! Tested the latest GOG version at 2560x1080, 3840x1080 and 5120x1440. You can buy me a coffee here.
  44. 1 point

    Version 1.0.0

    21 downloads

    A Cheat Engine script that allows to easily override game's default FOV values, written by Suicide_Machine.
  45. 1 point

    Version 1.0.1

    120 downloads

    Fixes the black borders to extend the viewport for widescreen made for Flawless Widescreen. SLW Fix.zip
  46. 1 point

    Version 1.1.1

    238 downloads

    Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which will remove the black bars.
  47. 1 point

    Version 1.0.0

    298 downloads

    This shader hack I've made disables the annoying top and bottom black bars shown during intro dialogues and other cutscenes. Just extract the files to the bin folder, where the game executable is located.
  48. 1 point

    Version v1.1

    6,449 downloads

    TL;DR This mod allows you to change the FPS limit to above 60, fix texture issues on modern hardware, adjust the despawn time of corpses, change the FOV, skip intro videos and force custom display resolutions. Quick start guide: Extract the zip-file to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Quake 4" Use the Quake4TweakerGUI to change the settings as desired Start the game like you would normally, for example directly through Steam Features The Quake 4 Tweaker is a utility mod for Quake 4 that offers various fixes and additional options for the game. It is easy to install and comes with a GUI for convenient configuration. Its features include: Properly adjusting the FPS limit to above 60 (e.g. to 144) Fixing texture bugs on modern hardware by forcing high image quality Adjusting the despawn time of corpses Changing the field of view Skipping of the intro videos Forcing the game to use a custom resolution Instructions Supported Versions This mod is designed for the latest, fully patched versions of Quake 4 and might not work when used with older or otherwise modified executables. Steam v1.4.2 Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the zip-file to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Quake 4" Use the Quake4TweakerGUI to change the settings as desired Start the game like you would normally, for example directly through Steam Note that the GUI is for configuration only and does not have to be running for the mod to work. Uninstall Rename or remove the dinput.dll from the folder of the game. Known Issues There are currently no known issues with the mod. Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another dinput.dll automatically if it has the name dinput_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a dinput.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a dinput_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions.
  49. 1 point

    Version 1.1

    731 downloads

    This is a bundle created for the sake of playing Unreal Tournament on Linux system. It is based on Flibitijibibo's UT Linux Steam Install pack, but implemented the unofficial 451 Patch. Be sure to read the README-KayX291.txt first! The only thing you are required are the game assets which can be found by buying the game from Steam, GOG.com, Retail etc. NOTE: If you encounter any issue regarding connecting to servers that rely on UTPG's patch (Such as Multiplay ones), you have no choice but to use the Flibitijibibo's UT Linux Steam Install pack. Non-Steam users can just copy and paste the content of his pack into main game folder, but if you wish to use some of the content I've made for this patch, I have uploaded the Extras for that.
  50. 1 point

    Version 2.0

    6,853 downloads

    Original source: FilePlanet This is the v2.0 patch for Metal Gear Solid 2: Substance. It is the latest version available.
×
×
  • Create New...