Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 08/17/2013 in Files

  1. 8 points

    Version 3.4

    15,858 downloads

    The tool removes black bars from the in-game cutscenes, cinematic cameras, shops and a number of other areas at 21:9 and wider resolutions. Since version 2.0 it also removes pillarboxing from the photo mode. Since version 3.0, it allows for custom FOV adjustment. Launch the game first, then the tool. The password for the archive is pcgw As expected from a trainer based on CE components, this tool does get falsely flagged by some anti-virus software as a trojan, while the rest correctly mark it as a "hacktool". Use the tool provided here at own risk and ideally avoid playing RDR Online without completely disabling the fix - especially the FOV hack. Tested at 2560x1080, 3840x1080 and 5760x1080. Additionally confirmed as working by two volunteers from WSGF. You can buy me a coffee here.
  2. 4 points

    Version 0.9.9

    3,000 downloads

    The tool removes black bars from the game at 21:9, 32:9, 48:9 and other wide resolutions. Download and unpack the archive using software like 7zip or PeaZip. The password is pcgw Launch the game Launch the tool Press the "Enable" key While in the game, briefly switch to the Borderless or Fullscreen mode. Use the tool to manually adjust the UI size at 32:9 and wider resolutions. Known issues: Stretched loading screens and rare FMVs. Minor UI display and alignment issues. Use the UI adjustment keys if necessary. The window mode switching requirement is also undesirable, hence the version number! Tested the latest Epic version at 2560x1080, briefly at 3840x1080, 5760x1080, 5120x2160 and 7680x1080 on a single monitor. You can buy me a coffee here.
  3. 4 points

    Version 1.0.0

    856 downloads

    Flawless Widescreen plugin for fixing wrong aspect ratio in 32:9 and Surround/Eyefinity resolutions. - Go to "C:\Program Files (x86)\Flawless Widescreen\" and unpack the content of this archive. (If it asks about overwriting some folders, accept - it will add new files and not overwrite any existing ones.) - Start FWS and select the plugin (under Helifax section). - Enable the plugin. - Play the game. Known Issues: The MAIN MENU will be stretched (incorrect Aspect Ratio) but in-game & cinematics everything will be using correct Aspect Ratio! I can only test it in 32:9 and it works perfect! I can't test Surround/Eyfinity resolutions but it should work fine, I expect! Cheers, Helifax
  4. 4 points

    Version 1.1.1

    5,262 downloads

    Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which will remove the black bars and allow for FOV adjustment through the UI or hotkeys
  5. 3 points

    Version 2.0

    524 downloads

    The tools for Steam and Microsoft versions of Halo: Reach and Halo 2: Anniversary remove black bars at cutscenes in real time for ultrawide, superwide and triple monitor resolutions. The password for the archives is pcgw Play the game in the Anti-Cheat Disabled mode for this to work. Launch the game first, then the tool. The tool is a trainer based on CE components that may trigger some anti-virus software. Making it into a patcher is not possible for Xbox and would be inconvenient to Steam users, as it would likely require replacing files before each launch in the anti-cheat-enabled mode. Tested the Xbox / Microsoft store version at 2560x1080 (both) and 5760x1080 (Reach). You can buy me a coffee here.
  6. 3 points

    Version 20190708

    1,568 downloads

    Unpack the archive with software like 7zip, then patch the main game exe with the tool. This will remove the letterboxing (black bars) from the game, resulting in more vertical FOV than ever before. There will be some vertical stretching of the menu and subtitles. Support with a donation.
  7. 3 points

    Version 1.0.0

    1,381 downloads

    Features: HOR+ FOV All supported screen resolutions are visible in the game menu Black bars removed from cut-scenes Installation: Unpack the archive Copy all files to the game folder "Stranglehold\Binaries\" Hotkeys: F5 - FOV + F6 - FOV - F7 - Default FOV In the Settings.ini file, you can change the following settings [FOV] Additional_FOV = 0.000 FOV value in degrees that will be added to current FOV
  8. 3 points

    Version 1.4.1

    4,001 downloads

    The tool removes black bars from cutscenes, resulting in more horizontal and vertical FOV by default but also allows for custom real time FOV adjustment. Unpack the archive with software like 7zip or PeaZip - the password is pcgw Launch the game first, followed by the tool. All trainers based on CE components may trigger some anti-virus software. Tested the latest Origin version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  9. 3 points

    Version 1.3.0

    8,956 downloads

    TL;DR This mod fixes various mouse and keyboard related input issues in NieR: Automata. Its features include raw mouse input for camera and aim movement, an entirely new crosshair aiming mode, non-standard bindings for dash/evade, pod auto-fire and more. Quick start guide: Extract the file xinput1_3.dll and NAIOM-GUI.exe to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\NieRAutomata" Start NAIOM-GUI.exe and set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Features The NieR: Automata Input Overhaul Mod (NAIOM) aims to solve all keyboard and mouse related issues in the game. As many other rough PC ports, NieR was primarily designed with a controller in mind and internally maps keyboard and mouse input to gamepad controls. This leads to various issue, including negative and positive mouse acceleration, as well as weird controls in certain perspectives, e.g. when aiming in side-scrolling mode. Its features include: Raw mouse input without any acceleration or smoothing Precise sensitivity configuration (calibrated for KovaaK's SensitivityMatcher) Fixed camera movement in third-person perspective New (optional) crosshair aiming mode for side-scrolling and top-down perspective New (optional) mouse cursors for menu and hacking (made by DevianArt user JulioDRai) Completely rebindable standard actions to any key or button combination including additional mouse buttons Non-standard keybindings, such as a dedicated dash/evade and pod fire toggle Full compatibility with FAR mod Instructions Supported Versions This mod is designed for the official version of NieR: Automata on Steam and might not work when used with otherwise modified executables. Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the file xinput1_3.dll and NAIOM-GUI.exe to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\NieRAutomata" Start NAIOM-GUI.exe and set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Note that even though the GUI is for configuration only and does not have to be running for the mod to work, it can be used together with the 'Reload Config' binding to adjust options of the fly. Update Perform a regular installation and just overwrite any existing files Note that an update retains all configured options unless they have actually been changed or removed in the new version. Uninstall Rename or remove the xinput1_3.dll from the folder of the game. Known Issues In the third-person view the camera might sometimes judder when it is near obstacles, such as walls. This has only partially to do with the mod, since the issue also occurs without it, but might just be more noticeable with it enabled Using the bindings of the mod does currently not change the ingame button prompts When using the new aiming mode the crosshair does currently also activate in situations where the aiming direction is fixed, e.g. in the side-scrolling flying mode The non-standard item switch bindings currently do not work as described in the tooltip when certain items are equipped The mod is currently not entirely compatible with the GeForce Experience overlay, which may not be controllable with the mouse in certain situations. However, the actual functionality can still be accessed by using the corresponding hotkeys The crosshair does currently not work in the hacking minigame and the standard mouse cursor will be shown instead Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another xinput1_3.dll automatically if it has the name xinput1_3_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a xinput1_3.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a xinput1_3_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Acknowledgments I would like to thank Kaibz for his continuous testing during the pre-release development of the mod. Without his detailed feedback and suggestions, creating the mod would have taken even longer than it already did. I also would like to thank DevianArt user JulioDRai for creating the awesome custom cursor package that is used by this mod. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions. Version History v1.3: Added (optional) custom mouse cursors for menu and hacking Added dedicated binding for opening the after clearance debug menu Fixed regular fire binding behavior when being held down Fixed hacking while remote controlling an enemy Fixed an issue with "sticky keys" after exiting a menu or dialog Fixed mouse button control in menus that occurred after hacking an enemy Fixed crash that occurred on certain systems when exiting the game v1.2: Added pattern based game version compatibility check Overhauled crosshair aiming mode to use the (hidden) mouse cursor for controlling the aim Increased crosshair aiming precision Reduced input lag of crosshair Fixed crosshair alignment in certain perspectives Fixed aiming in hacking mode Fixed a loading error that occurred on certain system configurations Fixed a bug that prevented certain clothing items to be equipped properly when pod petting was disabled Fixed a bug that prevented the mod from being loaded at all if the Steam controller mode was enabled v1.1: The dedicated dodge binding now has the same distance and duration as the double tap version v1.0: Initial public release
  10. 2 points

    Version 1.0

    539 downloads

    A total overhaul of the old Flawless Widescreen script for GTA V that has been dysfunctional for many months if not longer. As before, it allows for fine-tuning of FOV per each view - first person, in-vehicle, ADS, and third person. It also allows to remove the pillarboxing at cutscenes at 21:9 and wider, although having the latter enabled may cause some confirmation prompts to disappear at 32:9 and wider until disabled. Download and install Flawless Widescreen. Download this script and unpack the archive. Put its contents in the main Flawless Widescreen folder (usually \Program Files (x86)\Flawless Widescreen\). Launch Flawless Widescreen, select Grand Theft Auto V (updated) and set everything to preference. Tested the latest game version at 2560x1080, 3440x1440, 3840x1080, and 5760x1080. You can buy me a coffee.
  11. 2 points

    Version 1.0

    32 downloads

    The game features FMVs and rendered cutscenes that get pillarboxed at 21:9 and wider resolutions. This patcher removes the black bars from the rendered cutscenes and has no effect on the FMVs as there is no way to hack a pre-recorded video to add more content. Simply unpack the archive and patch the main game exe. Tested the latest Steam version at 2560x1080 and briefly at 5760x1080 in both DX modes. You can buy me a coffee or support me on patreon.
  12. 2 points

    Version 2.1

    9,389 downloads

    The trainers for Xbox/Microsoft and Epic game versions, and patchers for EGS and future versions remove pillarboxing (black bars) from real-time rendered cutscenes, menu and dialogue screens and offer the option to adjust FOV. Use software like PeaZip or 7zip to unpack the archives. The password is pcgw Making changes to Engine.ini to increase FOV through Y-axis calculation is no longer recommended, as it gets reset by finishers and possibly other in-game events. Make sure the config is in its default state to avoid unexpected issues. The mod does not address the cropping of the viewmodel and stretching of FMVs. In order to force unsupported resolutions, edit GameUserSettings.ini and set the ResolutionSizeX=, ResolutionSizeY=, DesiredScreenWidth=, DesiredScreenHeight= values as desired - e.g. 5760 and 1080. Getting into the settings in the game will undo the changes, so make sure to have configured the game to preference prior to editing the config. You can buy me a coffee here.
  13. 2 points

    Version 1.1

    273 downloads

    The tool removes black bars from the game in real time at 32:9 and wider resolutions. Compared to the great existing WSGF solution by Helifax, it is compatible with the Game Pass / Microsoft Store version of the game, automatically sets its resolution based on that of the desktop and has no aspect ratio limitations. Unpack the archive with software like 7zip - the password is pcgw Run the game, followed by the tool Press the Enable key as shown Set the fullscreen mode to Borderless and the in-game resolution to any of the available options All tools based on CE components may trigger some anti-virus software. Tested the latest Game Pass version at 5120x1440 and 11520x1080. You can buy me a coffee here.
  14. 2 points

    Version June 19

    1,354 downloads

    Unpack the archive and put the exe in \Octopath_Traveler\Binaries\Win64\ within the game folder, replacing the original. Launch the game and make sure your 21:9 resolution is selected. Tested with the latest Steam version, at 2560x1080.
  15. 2 points

    Version 1.0.0

    30 downloads

    This is a hack by Jackfuste which allows for widescreen resolutions to display properly instead of being stretched, additionally UI elements are unstretched and sit in the corners, and other 2D elements are centered, however loading screen graphics are stretched. This fix was downloaded from this forum: https://www.wsgf.org/phpBB3/viewtopic.php?f=64&t=32562 All credit goes to Jackfuste, I am merely uploading a mirror. This was tested on a cracked retail version of the game, it is unknown if it will also work on a Windows XP system using StarForce protection.
  16. 2 points

    Version 1.0

    1,430 downloads

    The tool removes black bars at any widescreen resolution. Unlike the existing solution, it works with the Microsoft version of the game. Download and unpack the archive using software like 7zip or PeaZip. The password is pcgw Launch the game Launch the tool Press the "Enable" key While in the game, press Alt+Enter twice. Alt+Tab may work as well. Try again if unsuccessful. Tested the latest Xbox Game Pass version at 2560x1080 and briefly at 7680x1080. The latter was affected by UI issues. You can buy me a coffee here.
  17. 2 points

    Version 2.0

    5,439 downloads

    Option 1: Use the included aspect ratio patchers to target \BloodstainedRotN\Binaries\Win64\BloodstainedRotN-Win64-Shipping.exe within the game folder. For the Steam version, follow the steps of this guide. Option 2 (works with Game Pass): Download the included trainer and unpack it with software like PeaZip. The password is pcgw Launch the game, then the tool. Press the shown keys to remove the black bars and adjust FOV as desired. To avoid upscaling, edit %LOCALAPPDATA%\BloodstainedRotN\Saved\Config\WindowsNoEditor\GameUserSettings.ini and at the end add ResolutionSizeX=YOUR_WIDTH ResolutionSizeY=YOUR_HEIGHT and set FullscreenMode=0 Changing game settings may reset the above. Tested the latest GOG and Xbox Game Pass versions at 2560x1080, 3840x1080, 5760x1080 and 3240x2160. You can buy me a coffee here.
  18. 2 points

    121,440 downloads

    Fixed executables to increase the frame rate cap for Star Wars: The Force Unleashed - Ultimate Sith Edition and Star Wars: The Force Unleashed II. Extract the chosen cap to the installation folder, replacing the existing file when prompted.
  19. 2 points

    Version v1.0.1

    574 downloads

    TL;DR The Youngblood Tweaker (YBT) allows additional tweaking of Wolfenstein: Youngblood. This includes options to scale player and enemy damage, adjusting the amount of head bobbing, disabling various HUD elements and more. Quick start guide: Extract the file dinput8.dll to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Wolfenstein Youngblood\". Start the YoungbloodTweakerGUI.exe set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Features The Youngblood Tweaker (YBT) is a small mod that offers additional options for Wolfenstein: Youngblood. The goal is to fix issues that prevent people from enjoying the game, as well as to provide quality of life improvements. The mod is still in its infancy with very limited functionality. It may be extended and improved based on user feedback in the future. Its features include: Adjusting player and enemy damage Disabling various HUD elements, such as enemy healthbars, objective markers, minimap or the crosshair Adjusting the amount of head bobbing when moving or turning Forcing the FOV outside the range that can be set ingame Disabling rendering of the fog Instructions Supported Versions This mod is designed for the latest, fully patched versions of the game and might not work when used with older or otherwise modified executables. Steam (international version) Steam (international demo version) Install The mod does not make any permanent changes to the game or to Windows and can easily be removed. Extract the file dinput8.dll to your main game folder. For example: "C:\Program Files (x86)\Steam\steamapps\common\Wolfenstein Youngblood\". Start the YoungbloodTweakerGUI.exe set the bindings and other settings as desired Start the game like you would normally, for example directly through Steam Note that even though the GUI is for configuration only and does not have to be running for the mod to work, it can be used together with the 'Reload Config' binding to adjust options of the fly. Update Perform a regular installation and just overwrite any existing files Note that an update retains all configured options unless they have actually been changed or removed in the new version. Uninstall Remove or rename the dinput8.dll from the folder of the game. Known Issues There are currently no known issues. Additional Information Antivirus Software Since this mod consists of an executable DLL file that uses "hacking techniques" such as injection and hooking, it could be classified as malicious by antivirus software. In that case, it might be necessary to add an exception rule to the scanner. If you lack the trust in random people on the internet -- and I would not blame you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. GUI Requirements The GUI requires the Microsoft .NET Framework 4.7.1 to work; which should already be installed on most systems. If you are having problems starting the program, you can download the required version either through a recommended Windows update (Windows 7 and later) or at Microsoft here. Loading Other Fixes/Mods/Injectors To increase the compatibility with other mods or injectors that are using a wrapper DLL, this fix offers two methods for remote loading of additional files. Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. File method: The mod will load another dinput8.dll automatically if it has the name dinput8_Remote.dll. Just rename the DLL you want to load accordingly. Using this method will lead to an error if the renamed DLL is not itself a dinput8.dll. Folder method: The mod will also automatically load all DLLs regardless of their names in a dinput8_Remote sub-directory. Just create a corresponding folder in the install directory of the mod. This is the only way to load multiple (conflicting) files. Input Bindings The GUI allows the binding of an action to an arbitrary combination of keys and buttons on the keyboard, the mouse or an XInput compatible controller. The system purposefully does not restrict conflicts, so multiple actions can be bound to the same key. Key Names: In case of the keyboard there might be a discrepancy between the key that was pressed and the one that is displayed. This is because the names are automatically translated based on the keyboard layout by using a Windows function. However, the mod always uses the physical keys as they were used during the creation of the binding, independent of the name that is displayed. Modifiers: Modifier bindings can be created by just using the corresponding key combinations. If you bind one action to Space and another another to LCTRL + Space and a third one to LALT + LCTRL + Space, only one of them will be triggered when Space is down, depending on the state of LCTRL and LALT. The system is not restricted to the usual modifier keys ALT, CTRL or SHIFT. Any key or button pressed before another acts as a modifier for the next one. Note that the order of the keys or buttons is only relevant during the binding process to distinguish bindings with the same modifiers. In the above example, Space could be held down and the other actions triggered by pressing LCTRL or LALT afterwards. Contact And Support If you like this mod and want to support the development or show your appreciation with a donation, you can find more information on my website. There you can also find out more about other mods that I have done and means to contact me if you have a question, want to provide feedback, bug reports and suggestions. Version History v1.0.1: Added support for game version 1.0.3 v1.0: Initial public release
  20. 2 points

    Version 20190621+

    1,609 downloads

    These patchers created for 2560x1080, 3440x1440, 32:9 and 5:4 resolutions will remove the black bars from the game. Unpack the archive with 7zip or similar software, then only use the patcher matching your resolution to modify the game executable. You can buy me a coffee here.
  21. 2 points

    Version 1.0.0

    283 downloads

    Unpack the archive Copy all files to the game folder, binkw32.dll should be replaced In the Settings.ini file, you can change the following settings [FPS] Limit = 60 FPS limiter value Unlock = 0 Value - 1 disables FPS limiter To achieve better performance at high FPS, it is better to disable the internal FPS limiter of the game. Use Vsync or external FPS limiter to limit FPS. This game is designed to work at a constant speed, so you must have a stable FPS, otherwise you will notice a slowdown or acceleration of the game speed. Example for 120 FPS with Vsync or external FPS limiter [FPS] Limit = 120 Unlock = 1 Example for 144 FPS with Vsync or external FPS limiter [FPS] Limit = 144 Unlock = 1 [RESOLUTION] Width = 0 Height = 0 This setting can override game's horizontal and vertical resolution Example for 1920x1080 resolution [RESOLUTION] Width = 1920 Height = 1080 [GAMMA] ColorCorrection = 1 Value - 0 disables color correction Use this setting to get more natural colors [TEXTURES] ShadowMapSize = 1024 Increase this value to get better shadows quality 256 - min value 8192 - max value Lighting = 384 Increase this value to avoid artifacts in some cases 256 - the min value 8192 - the max value
  22. 2 points

    Version 1.1

    516 downloads

    The game limits FOV between 70° and 80°. This tool lets you set the FOV anywhere between 1° and 160°. To use the tool, make sure you've run the game at least once, then close it. Run the tool, and choose which player profile to update the FOV for. Then enter the desired FOV and press enter. I recommend either 100 or 110. If all goes well, press any key to close the tool, then launch the game. Enjoy. If you go into the settings, the FOV slider will be out of bounds. You can safely adjust any other setting without affecting the FOV. If you touch the FOV slider, you'll revert the FOV changed by the tool. To fix, close the game and re-run the tool.
  23. 2 points

    Version 1.0.0

    285 downloads

    Need for Speed: Most Wanted - HiDPI icon By TripleZet https://www.deviantart.com/triplezet Source: https://www.deviantart.com/triplezet/art/Need-for-Speed-Most-Wanted-HiDPI-icon-745415159 Original icon for NFS: Most Wanted reworked in high resolution to look as close as possible to original 32x32 one. If you need something bigger than 256x256, feel free to use 640x640 PNG preview (from Source)
  24. 2 points
    Methanhydrat

    Metro Mouse Fix

    Version 1.2

    15,701 downloads

    What is this? This fix makes Metro 2033 Redux and Metro Last Light Redux use raw mouse input to solve the issue of different sensitivities for horizontal and vertical movement. It also changes the sensitivity range to more reasonable values. It is easy to install and use and does not require any external configuration. Overview Description Even though the mouse input in Metro 2033 Redux and Metro Last Light Redux is quite good, both games apply different sensitivities for vertical and horizontal movement. They also have sensitivity settings that are too high for some players who prefer slower movement. This fix removes these problems by acquiring raw mouse input and injecting it directly into the game's input function. Features Raw mouse input Same sensitivity in all directions More reasonable sensitivity range No additional smoothing or positive/negative mouse acceleration Configuration via the ingame settings as usual Simple installation and usage without any external configuration Instructions Supported Versions Important: This fix relies on the latest, fully patched executables of the supported versions. Older versions or ones that otherwise have been tempered with might not work. The fix supports the following versions of Metro 2033 Redux and Metro Last Light Redux: Steam/Retail GOG Install The fix does not make any permanent changes to the game or the system and can easily be removed (see below). Extract the file dinput8.dll to your main game folder*. For example: "C:\Program Files (x86)\Steam\steamapps\common\Metro 2033 Redux\" Start the game like you would normally, for example directly through Steam or GOG Galaxy See Loading Other Fixes/Mods/Injectors* for information on how to use the fix with another fix, mod or injector that uses a DLL file with the same name. Uninstall Remove or rename the dinput8.dll from the folder of the game. How To Use After the installation the fix does not require any additional treatment. Just launch and configure the game as usual. Loading Other Fixes/Mods/Injectors To increase the compatibility with other fixes, mods or injectors that are also using a dinput8.dll, this fix offers a remote loading feature of additional DLLs. This can be done in two ways: File method: The fix DLL will automatically load a DLL that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote.dll. Just rename the DLL file you want to load accordingly. This is the simplest way if you only have a conflict with one additional DLL Folder method: The fix DLL will also automatically load all DLL files regardless of their name in a sub-directory that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote. Just create a folder with the corresponding name in the install directory of the fix. This is the only way to load multiple (conflicting) DLLs Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process. Additional Information What You Should Know This fix is essentially a hack and relies on the layout of the specific executable. There may be crashes or unexpected issues. Feel free to provide feedback so that the problems can get fixed. Since the fix consists of an executable DLL-File, I could have put any harmful shenanigans in there. You just have to trust me that the file is clean. If you don't -- and why should you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. Be aware however, that because the fix uses "hacking techniques" such as injection and hooking, it could trigger anti-virus software without being harmful. Known Issues There are currently no known issues with the fix. Acknowledgments I would like to thank Magmarock (Steam/gog), who requested this fix and supported the development. Contact And Support If you like this fix and want to support the development or show your appreciation, you can find more information on my website. There you can also find out more about other fixes that I have done and means to contact me if you have a question, want to provide feedback, bug reports or suggestions.
  25. 2 points
    Farmer

    Powerslave EX fix

    Version 1

    1,137 downloads

    The Windows 10 Fall Creators Update introduced a bug into Powerslave EX which broke mouse control. The executable included in this archive provides a fix.
  26. 2 points

    Version v1.1

    188,558 downloads

    This fixes the following issues with Gothic and Gothic II on Windows 8 and later: Window border visible in fullscreen mode Low frame rate in fullscreen mode Extract anywhere and run install.bat to apply these fixes. Any previous versions are automatically replaced if present. This works by applying the following compatibility fixes to Gothic.exe, Gothic2.exe and GothicMod.exe: ForceSimpleWindow (hides window border) DXPrimaryEmulation -DisableMaxWindowedMode (fixes frame rate isssues) This fix does not remove Gothic's default frame rate cap; refer to its page for a separate fix for that issue. This fix will also work with Gothic Multiplayer (other mods that change the executable might not be affected).
  27. 1 point

    Version 2.0.1

    2,281 downloads

    The mod previously removed pillarboxing from the gameplay and menu, letterboxing from the cutscenes and adjusted FOV at 21:9 and wider resolutions. As of update 1.028a, the game only needs FOV adjustment to compensate for the reduced vertical FOV at the cutscenes at 21:9 and wider. The tool allows for real-time FOV adjustment affecting both the cutscenes and the gameplay. As any trainer based on CE components, it may trigger some anti-virus software. Use software like 7zip or PeaZip to unpack the archive. The password is pcgw Launch the game first, followed by the tool. Enable custom FOV adjustment and tweak FOV to preference. Tested the latest Steam version at 2560x1080, 3840x1080 and 5760x1080. The game copy was generously funded by AlRayes of Ultrawide Benchmarks. You can buy me a coffee here.
  28. 1 point

    Version 1.0

    20 downloads

    The tool allows for real-time FOV adjustment and contains pre-set values to match the gameplay FOV at ultrawide resolutions to the vertical of 16:9, with slight deviations at the cutscenes and fight screens. Unpack the archive with software like 7zip or PeaZip - the password is pcgw Launch the game Launch the tool Press the hotkeys to go with a preset or manually adjust FOV in real time Tested the latest Steam version kindly provided by cheswick of /r/ultrawidemasterrace at 2560x1080, 3840x1080 and 5760x1080, although the UI spanning would be very inconvenient at the latter. Please let me know whether this works in the Microsoft Store version, or tell me the process name for it. You can buy me a coffee here.
  29. 1 point

    Version 2.0.1

    503 downloads

    Option 1 (patchers): Unpack the patcher archive and use the applicable tool to patch the exe in \MoonMan\Binaries\Win64\ within the main folder. This will adjust FOV to match the vertical of 16:9. The tool also aims to remove all pillarboxing except from pre-rendered cutscenes but this may come at the cost of reduced FOV in the starting cutscene. Some further cutscenes are confirmed as having more horizontal FOV but there is no way to guarantee every cutscene will display correctly without playing through the game. Option 2 (trainer, supports Microsoft Store): Unpack the trainer / Game Pass archive with software like 7zip - the password is pcgw Launch the game Launch the tool Press the black bars removal key before a cutscene and use the other buttons to adjust FOV as desired Tested the latest GOG and Microsoft Store versions at 2560x1080, 3840x1080 and 5760x1080. You can buy me a coffee here.
  30. 1 point

    Version 1.0.1

    13 downloads

    The trainer allows for real-time FOV adjustment in the game. Unpack the archive - the password is pcgw Launch the game Launch the tool and press the keys as instructed The underlying script is built around the FOV bytes for Shantae found by czarman. For permanent changes or manual adjustment, modify the first instance of those bytes in a hex editor. Tested the latest Steam version.
  31. 1 point

    Version 1.4.0

    1,344 downloads

    Changelog: 1.2: Added support for ELiTE cracked exe Bug fixes Features: Allow custom resolutions Allow 30 FPS in cutscenes Fullscreen fix for DirectX 8 on Windows 10 Increase the resolution of background screens Fix FOV (Automatic or manual) Fix map aspect ratio Disable system check Disable safe mode Disable cutscene borders Modify blur effect Patch CreateImageSurface (Enable this to improve the look of the game, but may cause some visual issues) Disable DirectX fog Wallhack (F1) Wireframe mode (F2) Invert X and Y axis (F3 and F4) Controllable gamma (F5, F6 and F7) Modify sensitivity (Page up and Page down) Use HKEY_CURRENT_USER instead of HKEY_LOCAL_MACHINE Install: 1. Copy all the files to your Silent Hill 4 install folder. 2. Configure the width and height and other options in Silent_Hill_4_PC_Fix.ini. 3. Start the game with DLLInjector.exe. Credits: dns - Silent-Hill-4-Wide-Screen-Patch WidescreenFixesPack team
  32. 1 point

    Version 1.0.0

    634 downloads

    Ni no Kuni and Ni no Kuni 2 scripts Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which should adjust the AR for hor+ scaling
  33. 1 point

    Version 1.5

    597 downloads

    The patchers and trainer remove pillarboxing from the game, resulting in more horizontal FOV. Some of the in-game images and cutscenes do not appear to be wide enough to fully fill the screen, but the main cutscenes, menu and gameplay become free of black bars. Use one of the patchers to modify \ChildrenOfMorta_Data\Managed\Assembly-CSharp.dll within the game folder. For the Game Pass version, use the included trainer at 21:9 - the password for the 7zip archive is pcgw. Tested briefly at 21:9, 32:9 and 48:9 in the latest GOG and Game Pass versions. Resolutions wider than 21:9 were affected by severe terrain visibility issues. You can buy me a coffee here.
  34. 1 point

    Version 1.0.0

    12 downloads

    A Cheat Engine script that allows to easily override game's default FOV values, written by Suicide_Machine.
  35. 1 point

    Version 1.1

    1,967 downloads

    The mod removes pillarboxing and adjusts the vertical FOV to match that of 16:9. The pre-rendered cutscenes will be unaffected. Use software like PeaZip or 7-Zip and password pcgw to unpack the 7z archive. Play through the dog customization part at the very start of the game at 16:9. Pressing alt+enter should work as well. The mod is best used with DoF off. For higher FOV at 21:9, simply use the 32:9 patcher instead. Tested the Game Pass version at 3440x1440 and 3840x1080. You can buy me a coffee here.
  36. 1 point

    Version 1.0.0

    34 downloads

    Perfectly fixed widescreen script to go in Forces to fix the screen with Flawless Widescreen.
  37. 1 point
    killer-m

    Area 51 HOR+ FOV fix

    Version 1.1.0

    370 downloads

    FOV value is not reset to default after certain in-game cut-scenes Unpack the archive Copy all files to the game folder, binkw32.dll should be replaced In the Settings.ini file, you can change the following settings [FOV] FOV = 60.000 FOV value in degrees
  38. 1 point

    Version 2.0

    1,266 downloads

    Unpack the archive (password is pcgw), then use the trainer to modify the game FOV in real time. Make sure to run the game first to let the program detect it.
  39. 1 point

    Version 1.1.1

    149 downloads

    Install Flawless Widescreen Unpack the archive included here and copy the folders to the main Flawless Widescreen folder in Program Files Launch Flawless Widescreen and make sure the fix is enabled, which will remove the black bars.
  40. 1 point
    Mirh

    Creative ALchemy

    Version 1.45.15

    9,698 downloads

    Installs the latest version of Creative's ALchemy hardware DirectSound restoration utility. extracted from Sound BlasterX AE-5 drivers.
  41. 1 point

    Version (game version 0.0.4)

    208 downloads

    Unpack the applicable archive and use the tool to patch the exe in \DevilsHuntUnreal\Binaries\Win64\ within the main folder. This will remove the pillarboxing from the gameplay, menu screens and cutscenes. Tested with the latest GOG version at 2560x1080 and 5760x1080. You can buy me a coffee here.
  42. 1 point

    Version 1.0.0

    61 downloads

    These are the two English fan translations of Konosuba: Fukkatsu no Beldia (localized as either The Resurrection of Beldia or Verdia of the Resurrection) that is floating around online. Download and install just one of them, by extracting the dial.dat file into the data\font\ folder, overwriting the existing file. Note that menu items etc are not translated, as those requires binary patching the executable. Sources: Fan translation from 2017 by an unknown author: https://pastebin.com/xbQHV5DE Fan translation from 2018 GungnirHeart and CyanideBlizzard: https://konosubaitltranslation.wordpress.com/konosuba-verdia-of-the-resurrection/
  43. 1 point

    Version 3709.4

    831 downloads

    Download the archive, unpack it with 7zip or similar software, then point the patcher matching your aspect ratio at \TSCGame\Binaries\Win64\TSCGame-Win64-Shipping.exe within the game folder. This will match the FOV to the default 16:9 vertical value and remove the pillarboxing from the dialogue scenes. Tested at 2560x1080, 3440x1440, 3840x1080 and 5760x1080.
  44. 1 point

    Version 2

    674 downloads

    Without the patcher, black bars display for ultrawidescreen displays. Instructions: 1. Extract the file using 7-Zip: https://www.7-zip.org/ 2. Copy the corresponding resolution patcher 3. Paste the patcher inside the Steam installation folder of Devil May Cry 5 (<Steam-folder>/steamapps/Devil May Cry 5) 4. Run patcher, press Start and then press OK. 5. Select the correct resolution in-game. Source: http://www.wsgf.org/forums/viewtopic.php?f=95&amp;t=33038&amp;start=30 Note: the hosted version is the 'steam' version of the patcher, not the Denuvo-free version which is hosted on WSGF.
  45. 1 point

    Version 1.0.0

    230 downloads

    This shader hack I've made disables the annoying top and bottom black bars shown during intro dialogues and other cutscenes. Just extract the files to the bin folder, where the game executable is located.
  46. 1 point
    Keith

    Split/Second 60 FPS Patch

    Version 1.0.0

    2,945 downloads

    Split/Second patch that removes the 30 FPS limiter and enables the game to run at 60 Hz; it also fixes physics to ensure physics and power plays work. Created by ducon2016. Run NoobPatcher.exe Select the unpatched (original) .exe Select "SplitSecond.NoobDiff" Wait for the file to get patched Run the newly created patched .exe
  47. 1 point

    Version 1.0.0

    2,285 downloads

    Unofficial Settings configuration tool for Sonic Heroes. It's faster than the default launcher and comes with options for 720p, 1080p and 4K, in 16:9 widescreen, and comes with Xinput support pre-configured.
  48. 1 point
    Garrett

    OpenAL

    Version 2.1.0.0

    27,208 downloads

    OpenAL 2.1.0.0 extracted from a Creative driver installer. This is an official update and is newer than the version on Creative's site. Games that include OpenAL32.dll will not use the updated file unless you delete or replace the game's own version to make it see the new one instead.
  49. 1 point
    Beastman95

    dgVoodoo 2

    Version 2.54

    33,499 downloads

    Original file: http://dege.freeweb.hu/dgVoodoo2.html dgVoodoo 2 is a wrapper for old graphics API's for Windows Vista/7/8/10. This wrapper uses Direct3D 11 at GPU feature level 10.1 as wrapping output.
  50. 1 point

    1,778 downloads

    About This patch is intended to solve certain issues that occur on modern systems, related to game's usage of ancient DirectX APIs. It also enables the game to run via dgVoodoo DirectX wrapper. The main goal of this patch was to get the game running properly on all machines I have at home, which have graphics cards of all popular vendors (NVIDIA, AMD and Intel) and running Windows 10. The following changes have been implemented: Pass DDCREATE_EMULATIONONLY for DirectDraw objects used for intro cinematics, prevents the Fatal error message on startup or black screen during cinematics, depending on graphics drivers. Call SetAppCompatData(12, 0) in ddraw.dll to disable maximized windowed mode on Windows 8 and above, allows the game to run in real fullscreen mode on those systems and restores ability to change gamma with F2 and F3 keys. Delay execution of DllMain logic of rendering libraries to the point when the LoadLibrary call returns (startup hang prevention and dgVoodoo compatibility). Included registry fix which disables Windows' interfering with the game, launcher. This interference can make the game crash or not start when ran through launcher under certain circumstances. Installation Files in this archive were tested with retail version of the game, they may work with other versions, just make sure neither sft8lib.dll, D3D6Lib.dll or D3D7Lib.dll are present in the root game folder, the patch bundles updated ones in data\Stealth\Render and having the old ones in the root folder overriding the new ones is a recipe for disaster. It's also recommended to setup the game to use dgVoodoo 2 wrapper for the best experience, though it's not mandatory. Extract the contents of Soulbringer folder into your own, overwriting original files. Apply Disable_Soulbringer_Compat_Fixes.reg registry fix which takes care of launcher issues. This may not take effect until you right-click on Soulbringer.exe, go to compatibility tab and click OK to cause Windows to register new settings. If you're not going to use dgVoodoo with the game, you should set Reduced color mode (8-bit) on all game executables' Compatibility tab (Soulbringer.exe, SoulbringeVC.exe, SoulbringeVCnoeax.exe), it won't actually downgrade the colors, but it allows for rendering modes enumeration to work properly. This is only needed on Windows 8 and above. If you want software mode to not have garbled colors without dgVoodoo, apply Soulbringer_Palette_Fix_x86.reg (32-bit Windows) or Soulbringer_Palette_Fix_x64.reg (64-bit Windows). Note that the software mode doesn't work on Windows 8 and above without dgVoodoo. Launch Soulbringer, click Video, make sure any DX6 option is selected then choose the desired game resolution. The ones with 4:3 aspect ratio are the best given that game can't deal with wider aspect ratios. Other modes can work, but run too fast without forcing VSYNC (60 Hz) or capping frame-rate to 60 FPS. Click Advanced and make sure the EAX option is disabled unless you're sure you have a working setup that supports running DirectSound3D games with EAX effects and EAX Unified is installed. Additional notes There is a strange issue with game on Windows 8 and above, it doesn't pick up on all rendering modes unless Reduced color mode (8-bit) is selected from its Compatibility tab under Properties. When run for the very first time, it works though. It always works properly when run through dgVoodoo. Contrary to what the game ReadMe says, DX6 mode actually seems to run faster than DX7 and doesn't have the problem activating VSYNC to keep the FPS at 60. Running too fast makes the game glitchy. The downside, text is blurry, needs some sort of fix related to texel alignment, ATI specific fix is called Altertnate Pixel Centers, PixelCenter (31 00 00 00) setting in registry, no idea how to set it on application basis on today's drivers, irrevelant solution for NVIDIA and Intel, doesn't work with dgVoodoo neither. Future version of dgVoodoo may have a fix for that. With recent NVIDIA drivers, without using dgVoodoo, game may hang when tabbing out, press CTRL + ALT + DEL, then ESC to get to the desktop.
×
×
  • Create New...