Jump to content

Grand Theft Auto V FOV, ultrawide - new FWS script 1.1


11 Screenshots

About This File

A total overhaul of the old Flawless Widescreen script for GTA V that has been dysfunctional for many months if not longer.
As before, it allows for fine-tuning of FOV per each view - first person, in-vehicle, ADS, and third person. It also allows to remove the pillarboxing at cutscenes at 21:9 and wider, although having the latter enabled may cause some confirmation prompts to disappear at 32:9 and wider until disabled.

  1. Download and install Flawless Widescreen.
  2. Download this script and unpack the archive.
  3. Put its contents in the main Flawless Widescreen folder (usually \Program Files (x86)\Flawless Widescreen\).
  4. Launch Flawless Widescreen, select Grand Theft Auto V (updated) and set everything to preference.

Tested the latest game version at 2560x1080, 3440x1440, 3840x1080, and 5760x1080.

You can buy me a coffee.


What's New in Version 1.1

Released

Two fix patterns updated to be more inclusive and support the latest game version.




User Feedback

Recommended Comments



Hi Rose!! Thank you so much for this fix, been hoping for one for a long time!! :) I'm experiencing an issue where the fix does not enable (the checkbox unchecks itself) and there's a message that  says "Could not find FP_FOVFix injection point, Grand Theft Auto V may have updated to a version that is no longer supported.  Try restarting Grand Theft Auto V or selecting a different version and re-enable the fix." I am using SweetFX and Reshade and was wondering if it's possible the letterbox fix is conflicting with those?  Attached screenshot of the message and my installation paths for the fix:

 

 

gta5fws.png

gta5installscreenshots.png

Share this comment


Link to comment
Share on other sites

It seems that you are not selecting the updated version. I downloaded this today and it worked perfectly fine, but on the flawless widescreen app there are two GTA plugins, you have to select the one with "(updated)" at the end. The author of the new one is Rose, you are using the original from HaYDeN.

 

 

1.png

2.PNG

Share this comment


Link to comment
Share on other sites
8 minutes ago, masterboy9 said:

It seems that you are not selecting the updated version. I downloaded this today and it worked perfectly fine, but on the flawless widescreen app there are two GTA plugins, you have to select the one with "(updated)" at the end. The author of the new one is Rose, you are using the original from HaYDeN.

 

 

1.png

2.PNG

Amazing!! Thank you SO much I appreciate your help!

Share this comment


Link to comment
Share on other sites

Thanks, masterboy9.
I intentionally avoided overwriting the old FWS script so that a repo update wouldn't restore the one by HaYDeN.
I did my best to separate the new from the old - there's a new name, background, and even icons. It's also under WSGF Plugins, not FWS Plugins. The crucial "(updated)" part is in step 4 of the instructions and also in the last screenshot.

Share this comment


Link to comment
Share on other sites

Is it possible to get this to work with FiveM? I edited the LUA file for it and changed the process to FiveM.exe but I get the error FoVFP error. It says that it's outdated.

Share this comment


Link to comment
Share on other sites

Can't seem to get this to work with Rage MP-- status is stuck on "Searching for Grand Theft Auto V (updated) process, please configure desired settings and launch the game"

Share this comment


Link to comment
Share on other sites

Hey rose! im using your mod and it works great, but it doesn't work on the stripclub dance minigame, is there a way to increase the FOV there?

Share this comment


Link to comment
Share on other sites

Is this now depreciated? Cause i can’t get it to work.

I enable the fix and check every box, but when i launch the game ‘fix enabled’ checkmark unchecks itself and cannot be checked back on. I’m using updated one. Is it just me? Could it be conflicting with mods? Or maybe because my gta is epic store version?

Share this comment


Link to comment
Share on other sites
4 hours ago, one eyed smile said:

Is this now depreciated? Cause i can’t get it to work.

I enable the fix and check every box, but when i launch the game ‘fix enabled’ checkmark unchecks itself and cannot be checked back on. I’m using updated one. Is it just me? Could it be conflicting with mods? Or maybe because my gta is epic store version?

I can't imagine the Epic version being different but the conflicting with other mods is a possibility.
The script is still working fine on my end today.

Share this comment


Link to comment
Share on other sites

Nvm. I fixed it by reinstalling flawless widescreen again. I didn’t have the option to check ‘acknowledge and ignore’ at first. Maybe i messed somethings up in the installation. Mod works great! Is there a way to keep all the settings even when restarted the pc?

Share this comment


Link to comment
Share on other sites

Settings don't wanna be saved, is there any way to fix this? thanks, also I hope you are ready to update for the new Update!

Share this comment


Link to comment
Share on other sites

Hi,

Does this still work officially? For me it does not unfortunately (may be just an isolated issue)? 

Share this comment


Link to comment
Share on other sites
3 minutes ago, briggy said:

Hi,

Does this still work officially? For me it does not unfortunately (may be just an isolated issue)? 

I'm not sure what you mean by officially. My "(updated)" plugin is still working as intended on my end today. I toggled each of the boxes and moved some of the sliders to make sure it's reflected in the game.

Share this comment


Link to comment
Share on other sites
8 minutes ago, Rose said:

I'm not sure what you mean by officially. My "(updated)" plugin is still working as intended on my end today. I toggled each of the boxes and moved some of the sliders to make sure it's reflected in the game.

Many thanks for the swift response. 

"Officially" as in does it still work, which you have confirmed that it does - thanks once again. I re-installed it and it seems to be playing ball now  so please dis-regard. 

Is there anyway to adjust the HUD sizing elements to correctly fit the map for 21:9? Sorry if it's a dumb question. 
 

Share this comment


Link to comment
Share on other sites
10 minutes ago, briggy said:

Is there anyway to adjust the HUD sizing elements to correctly fit the map for 21:9? Sorry if it's a dumb question. 

There are two mods set to achieve it but I don't know whether they still work or how they work.

Share this comment


Link to comment
Share on other sites
5 minutes ago, Rose said:

There are two mods set to achieve it but I don't know whether they still work or how they work.

Cheers for this once again. 

I primarily play online and as these mods listed above definitively require OpenIV I will refrain, as will most likely end in a ban. 

Share this comment


Link to comment
Share on other sites

Hi, im having issues with flawless and i wondered if you could help, everytime i open flawless it says that i need to open GTA5 which i do and it then says in the status tab ( what i have shown in the picture below. Ive tried redownloading flawless,steam,GTA5 and still it says the same. I believe its to do with the location of my game but i really dont know, thanks for reading,

denbe

Screenshot_45.png

Share this comment


Link to comment
Share on other sites
11 minutes ago, denbe.yt@gmail.com said:

Hi, im having issues with flawless and i wondered if you could help, everytime i open flawless it says that i need to open GTA5 which i do and it then says in the status tab ( what i have shown in the picture below. Ive tried redownloading flawless,steam,GTA5 and still it says the same. I believe its to do with the location of my game but i really dont know, thanks for reading,

denbe

Hi. I've not come across this issue before. It may be an issue of permissions, as Flawless Widescreen requires to be run as an administrator.

Share this comment


Link to comment
Share on other sites

Ive tried what you said and sadly still nothing has changed its still going off with the hacktool thing, if its possible could you run me through all the whole process and we can try get to the bottom to together on a discord call or something?, that would be very helpful if you could my discord tag is DenBe#2724 so if you can add me and ill notify you on there when i can call you thank you

Share this comment


Link to comment
Share on other sites
5 hours ago, denbe.yt@gmail.com said:

Ive tried what you said and sadly still nothing has changed its still going off with the hacktool thing, if its possible could you run me through all the whole process and we can try get to the bottom to together on a discord call or something?, that would be very helpful if you could my discord tag is DenBe#2724 so if you can add me and ill notify you on there when i can call you thank you

 

Make sure you have 2010 C++ installed as flawless wide-screen will not work without it:

https://www.microsoft.com/en-gb/download/details.aspx?id=5555

 

 

Share this comment


Link to comment
Share on other sites
Just now, rh.nabil27@gmail.com said:

I have a question.
Does it still work online?

Only one way to find out, right?

Share this comment


Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
  • Found PCGamingWiki useful? Please consider making a Donation or visiting our Patreon.
  • Similar Content

    • By Rose
      Compared to the existing solutions from WSGF made to remove the black bars appearing in the game at 21:9 and wider resolutions, this tool perfectly matches the vertical field of view of each scene to that of 16:9, also allowing to see and adjust the current FOV in real time.
      Download the archive and unpack it using the password pcgw Launch the game, followed by the tool. Apply the fix before the main menu appears or at the main menu before loading into a game. All trainers containing CE components may trigger some anti-virus software.
      Inspired in part by killer-m's work.
      Tested the latest Steam version at 2560x1080, 3840x1080 and 5760x1080.

      You can buy me a coffee or become a patron.
    • By Rose
      The small patcher allows any resolution to be selected in the game.
      Unpack the archive and follow the instructions of the tool.

      Tested the latest Steam version briefly at 2560x1080.

      You can buy me a coffee or become a patron.
    • By Rose
      The small patcher and trainer for Dungeons & Dragons: Dark Alliance remove black bars appearing in the game at 21:9 and wider resolutions.

      For the Microsoft Store version,
      Download and unpack the applicable archive using the password pcgw Launch the game, followed by the tool. Press the button as shown to toggle the black bars off and on. For Steam,
      Unpack the Shipping exe found in /CotH/Binaries/Win64/ with Steamless (like this). Download the applicable archive from here and patch the unpacked file renamed to match the original. Simply patching should work for any other versions.

      Tested the latest Game Pass version at 2560x1080 and briefly at 5760x1080.

      You can buy me a coffee or become a patron.
    • By Rose
      The small patcher for Tom Clancy's Ghost Recon Breakpoint removes black bars appearing in the game at 21:9 and wider resolutions.
      Disable BattleEye. Download and unpack the archive included here. Use the patcher to modify GRB.exe and/or GRB_vulkan.exe depending on the preferred graphics API mode - DirectX vs Vulkan. Be mindful of the backup files taking up as much space as the original executables. They can be safely removed, but then the game files will need to be verified if the goal is to revert or to play PvP.
      Tested the latest Ubisoft Connect version at 2560x1080. Additionally verified as working by a WSGF user.

      You can buy me a coffee or become a patron.
    • By parittolo
      You need to have Cheat Engine installed, then launch the game, open the table, attach it to the process and use the hotkeys:
       
      F4 - activate the mod
      F5 - reset FoV to default
      F6 - Increase FoV
      F7 - Decrease FoV
      F8 - Set FoV to default +30°
       
      Quick video to show the mod in action: https://streamable.com/2iosxc
       
      Known issues:
      If you set an offset too high or too low the camera will flip upside down, just press F5 to reset it.
      In-engine cutscenes are also affected, things that weren't supposed to be in the shot may behave oddly.
      Vehicle weapon crosshairs may be off-center (higher) when using higher FoV, just aim a bit higher than the actual target.
  • Who's Online   0 Members, 0 Anonymous, 289 Guests (See full list)

    There are no registered users currently online

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Member Statistics

    6,899
    Total Members
    3,870
    Most Online
    genericuser2077
    Newest Member
    genericuser2077
    Joined
×
×
  • Create New...