Jump to content

441 files

  1. Music Wrapper for Jedi Knight: Dark Forces II and Mysteries of the Sith

    Music Wrapper v1.2
    for Jedi Knight: Dark Forces II and Mysteries of the Sith
    This package bundles the best wrappers and known fixes to help get music working in both games.
    For reference, both games used CD Audio for their music tracks. The modern, CD-less solution, used by resellers like GOG and Steam, is to rip the tracks to .ogg files and then supply a wrapper (a special .dll file) to translate the game's calls to play the CD tracks into calls to play the .ogg files from the hard drive, instead. Unfortunately, with newer builds of Windows that haven't been tested with the games' installed compatibility settings, that wrapper can stop working and the result is a loss of music.
    This is primarily for the GOG and Steam releases of these games, since its their compatibility settings that interfere with the wrapper. You can, however, also use these instructions to get music working from the hard drive in the retail release.

    Install
    =======
    Copy the five .dll files to your game folder, overwriting any that are already there.
    If you still don't have music, perform the following steps, preferably checking music after each one:
    * Verify that you have a subfolder named Music with track files named Track12[-32].ogg (JK) or Track02[-14].ogg (MotS).
      If you don't (or you'd like higher quality versions):
        * For JK, follow the directions at https://pcgamingwiki.com/wiki/Star_Wars:_Jedi_Knight_–_Dark_Forces_II#Higher_quality_music
        * For MotS, follow the directions at https://pcgamingwiki.com/wiki/Star_Wars:_Jedi_Knight_–_Mysteries_of_the_Sith#Higher_quality_music
    * Rename JK.exe (JK) or JKM.exe (MotS) to something else (ex. JediKnight.exe). This will disassociate the executable from installed compatibility settings that can interfere with music playback.
    * Double-click on the provided .reg file. This will remove the compatibility settings from the registry.
    * Delete/rename winmm.dll and rename winmm_alternate.dll to winmm.dll. See below for the differences between the two version.

    Wrappers
    ========
    * Winmm.dll is Tarvis' fixed wrapper for Windows 10, dated Oct 25, 2015. Credit belongs to Tarvis.
      His changelog:
        -Game not starting on Windows 10
        -Each level plays a track further than it should have 
        -Music playlist would not restart unless player stands still a few seconds/ enters then leaves esc menu 
        -Music volume would not change 
        -Music took about half a second to stop when going back to main menu/starting a cutscene
      Source: https://www.gog.com/forum/star_wars_dark_forces_series/jk_updated_cd_music_player_dll_fix_volume_looping_etc/page1
    * Winmm_alternate.dll is GOG's wrapper, dated July 15, 2015. Credit belongs to GOG.
      Unlike Tarvis' version, this one works with the German language pack (and, maybe, other non-English versions of the game or mods). It's possible that it's generally more compatible than Tarvis' version, but doesn't have most of the fixes. One reported issue is that the music stops playing once it's gone through all of the tracks (i.e. it won't loop back to the first track played). For that reason, it's not the default wrapper in this pack, but you may have to live with issues like that if you get no music at all with Tarvis' version.

    Changelog
    =========
    1.2: Added .reg file and re-wrote the instructions
    1.1: Added Tarvis' version, made it the default and re-wrote the instructions
    1.0: Initial release
     

    12 downloads

    0 comments

    Submitted

  2. DirectPlay standalone (without Windows ask for installation)

    Both zip-files provide the "DirectPlay" files needed to execute games that ask for them to work correctly. (One zip contains Windows XP DirectPlay, and the other contains Windows 10 Legacy DirectPlay, both do the same).
    * Important: Put all the files of one of the two zip-files in the same directory where the executable of the game is.
     
    -Tested on Windows 10 - 22H2, and working with the next games (Those games are working with XP and Win10 files):
     
    · Blade - The Edge of Darkness / Severance
    · The Suffering
    · The Suffering - Ties that Bind
    · Dungeon Keeper
    · Syberia
    · Syberia 2
     
    Maybe this method also will work with other "DirectPlay" games.

    1,461 downloads

    2 comments

    Updated

  3. Transformers: War for Cybertron FPS Cap Unlocker

    FPS cap remover for Transformers: War for Cybertron.
     
    This file was made by Psych and was originally downloaded from MediaFire.

    20,026 downloads

    1 comment

    Updated

  4. Prisoner of War - Launcher with Widescreen resolution selector

    Offers three Widescreen resolutions, 1920x1080, 2560x1440 and 3840x2160 instead of the original 4:3 resolutions.
    The default widescreen behavior of the game is Vert-. Use in conjunction with the Hor+ fix:
     

    7 downloads

    0 comments

    Updated

  5. The Callisto Protocol FOV fix

    Stripped down versions of Akira's cheat tables containing just the FOV changer with added hotkeys.
    How to use:
    Install Cheat Engine. Double-click the .CT file to open it. Click the PC icon in Cheat Engine, and select the game process. Keep the list. Enable the FoV Modifier option to change the FOV. If you want a different default value, change the following value in the .CT file with a text editor:
    FieldOfView_F:   dd (float)90 Hotkeys:
    F5: Toggle FOV changer Page Down: Increase FOV by 3 Page Up: Decrease FOV by 3 Right MB (pressed): Set FOV to 60 Right MB retains the original FOV while aiming. To change the hotkey/value in Cheat Engine, right click FoV > Set/Change hotkeys > Edit ADS hotkey.

    115 downloads

    0 comments

    Updated

  6. Halo: Spartan Assault Profile Fix

    Extract to steam user folder to fix black screen. Also works on Steam Deck!

    19 downloads

    0 comments

    Updated

  7. RPG Maker 2000 - Japanese RTP Files

    Installing the japanese version of the RTP of the japanese version RPG Maker 2000, it requires changing locales for example
    here's just the files it installs, so you can use Easyrpg and avoid headaches

    40 downloads

    0 comments

    Submitted

  8. Nosferatu: The Wrath of Malachi widescreen fix

    The game doesn't support widescreen resolutions (1280 x 960 is the highest resolution available), the patch adds native widescreen support for 20 resolutions.
     
    Downloaded from WSGF: http://www.wsgf.org/dr/nosferatu-wrath-malachi/en
     

     

    5,625 downloads

    2 comments

    Submitted

  9. Split/Second 60 FPS Patch

    Split/Second patch that removes the 30 FPS limiter and enables the game to run at 60 Hz; it also fixes physics to ensure physics and power plays work. Created by ducon2016.
    Run NoobPatcher.exe Select the unpatched (original) .exe Select "SplitSecond.NoobDiff" Wait for the file to get patched Run the newly created patched .exe

    11,574 downloads

    6 comments

    Submitted

  10. The Saboteur intro skip

    Blank intro video file for The Saboteur.
     
    Extract into Bink in the installation folder, replacing the existing file if prompted.

    5,486 downloads

    1 comment

    Updated

  11. Quantum Break motion blur and depth of field disabler

    Helix Mod for Quantum Break stripped down to disable motion blur and depth of field only.

    Extract the files to <path-to-game>\dx11.

    You can support the authors of the fix by donating. See the original blog post for more information.

    3,570 downloads

    11 comments

    Updated

  12. FFXIII - Console Button Prompts (v2.0)

    Backup of Krisan Thyme's mod, which has long since been removed. Extract into game folder, run the .bat file and follow the instructions.

    4 downloads

    0 comments

    Updated

  13. Ubi Soft Installer Fix

    This fix installs a compatibility shim allowing for installers of certain older Ubisoft titles (those that use "SetupUbi.exe" as their installer) to work correctly on systems in which they would previously crash or hang.

    23 downloads

    2 comments

    Submitted

  14. Nobody Saves the World - 21x9 Fix

    My new 21x9 and FOV Fix for Nobody Saves the World.
    I used PhantomGamers SUWSF Tool for this fix but you also can use Steamless Software and hex edit it yourself, look in the SUWSF.ini for the changed bytes.


    Tested with the latest Steam version at 3440x1440 and 3840x1600.
    You can buy me a coffee if you like my work.
    Password is always: pcgw

    33 downloads

    0 comments

    Updated

  15. Homefront - PhysX Fix

    Game loads needed PhysX components directly from the game folder without (legacy) PhysX installation.
    (Doesn't change any game/system files)

    Fixes all issues caused by a missing installation of (legacy) PhysX.
    Installation:
    Just copy the "Binaries" folder from the archive into your game folder and Enjoy!

    76 downloads

    0 comments

    Updated

  16. The History Channel: Civil War - Secret Missions FOV Fix

    Changes the FOV to ~90.

    25 downloads

    0 comments

    Updated

  17. Fix for swapped elevator animations in Resident Evil HD Remaster

    This fixes the swapped elevator animations in Resident Evil when traveling to and from the lowest floor of the laboratory near the end of the game to confront Wesker: the animation for going up is played when going down and vice versa.
    This oversight is not present on GameCube and Wii and was introduced to the modern versions.
    To install, simply extract to the base installation folder and overwrite any files when asked.

    161 downloads

    0 comments

    Updated

  18. Rayman 2 FOV Fixes

    Hex edited files that fix field of view (FOV) for specific aspect ratio.
    You can choose from:
    15x9
    16x9
    16x10
    21x9
    25x16
    32x9

    4 downloads

    0 comments

    Submitted

  19. Astalon - Tears of the Earth - FPS Unlocker

    This is a program to unlock the framerate in the game Astalon: Tears of the Earth. It's made with Cheat Engine so some Antivirus software will flag it. Extract the archive with the password pcgw

    The game has a forced 60 fps cap and no Vsync, and from my testing it also has issues with freesync/gsync so it's pretty bad. With this tool you can unlock the FPS which will eliminate input lag and get really smooth motion on camera panning. Since you will probably get 1000+ fps, if you want an fps limit use the Scanline Sync feature from Riva Tuner Statistics Server, which will cap it your refresh rate, eliminate judder and tearing with almost no input lag.
    Instructions:
    Extract the archive with the password pcgw Open the tool. Start the game. It should get patched automatically and you should hear a sound effect, otherwise press F1.  

    64 downloads

    4 comments

    Updated

  20. Need for Speed: Underground Other Languages Audio and Cutscene Files

    This language file patch contains 4 different languages:
    French German Italian Spanish Includes all cutscenes and lines dubbed for these languages. Simply extract the files to path of game and manually change game's language. After that, you can enjoy the game in the desired language!
     
    I'm still looking for the Japanese files, if you have them comment here.

    251 downloads

    3 comments

    Updated

  21. Tomb Raider (2013) Yamatai Patch

    Yamatai Patch TR2013 Exploration/Augmentation Trainer
     
    Yamatai Patch is a memory trainer for Tomb Raider (2013) geared towards video recording and exploration rather than straightforward cheating. With everything from camera adjustments to direct modifications to the code that controls her breast size and jiggle, there's a little something for everyone.
    This trainer was made by sicklebrick and was originally downloaded from sicklebrick.com (archived).
    The archive password is pcgw
    Usage:
    Run the game or the Yamatai Patch first. The game has to be running to activate the features. Changes will be reset when the game is closed.

    13,490 downloads

    3 comments

    Updated

  22. Worms Forts Launcher

    Unofficial launcher by AlexBond for Worms Forts: Under Siege. Use to set options and correct the aspect ratio for widescreen resolutions.
     
    NOTE: For the GOG.com version run WFLauncher.exe as an administrator (required due to the GOG.com version of the game being set to run as an administrator on launch).
     
    This file was downloaded from 2shared. The original 7z archive has been repackaged as Zip.

    1,613 downloads

    2 comments

    Updated

  23. MaLDo OnTheFly for Crysis 3

    MaLDo's OnTheFly tool for Crysis 3 has two objectives: the first is that you can use all the variables of the game console (locked and unlocked), and the second is that all the tests you want to do with them can be done from within the game without pausing gameplay.
     
    It was originally downloaded from maldotex.blogspot.com (archived).
     
    Instructions
    Make a backup copy of your original executable.
    Copy files into your Crysis 3 folder.
    Run Enable_MaLDoC3.bat into "Crysis 3\Bin32" folder.
    Start Crysis 3.
    To disable it run Disable_MaLDoC3.bat into "Crysis 3\Bin32" folder.

     
    Key bindings

    O - Hide HUD
    P - Show HUD
    I - Modify weapon FOV (Crysis 3 resets weapon FOV after every respawn)
    6 - Reload low quality preset
    7 - Reload recommended quality preset
    8 - Reload ultra quality preset
    9 - Activate normal depth of field
    0 - Activate ultra depth of field (bokeh filter in far distance but no weapon DOF and no radial DOF while aiming)
    T - Activate slow motion
    Z - Disable slow motion

    826 downloads

    1 comment

    Submitted

  24. Missing shared libraries

    These files are the 2 missing shared libraries for 12 Is Better Than 6 for the Linux version of the game.

    6 downloads

    0 comments

    Submitted

  25. Metro Mouse Fix

    What is this?
    This fix makes Metro 2033 Redux and Metro Last Light Redux use raw mouse input to solve the issue of different sensitivities for horizontal and vertical movement. It also changes the sensitivity range to more reasonable values. It is easy to install and use and does not require any external configuration.
     

    Overview

    Description
    Even though the mouse input in Metro 2033 Redux and Metro Last Light Redux is quite good, both games apply different sensitivities for vertical and horizontal movement. They also have sensitivity settings that are too high for some players who prefer slower movement.
     
    This fix removes these problems by acquiring raw mouse input and injecting it directly into the game's input function.
     

    Features
    Raw mouse input
    Same sensitivity in all directions
    More reasonable sensitivity range
    No additional smoothing or positive/negative mouse acceleration
    Configuration via the ingame settings as usual
    Simple installation and usage without any external configuration


    Instructions

    Supported Versions
    Important: This fix relies on the latest, fully patched executables of the supported versions. Older versions or ones that otherwise have been tempered with might not work.
     
     
    The fix supports the following versions of Metro 2033 Redux and Metro Last Light Redux:
    Steam/Retail
    GOG


    Install
    The fix does not make any permanent changes to the game or the system and can easily be removed (see below).
    Extract the file dinput8.dll to your main game folder*. For example: "C:\Program Files (x86)\Steam\steamapps\common\Metro 2033 Redux\"
    Start the game like you would normally, for example directly through Steam or GOG Galaxy

    See Loading Other Fixes/Mods/Injectors* for information on how to use the fix with another fix, mod or injector that uses a DLL file with the same name.
     

    Uninstall
    Remove or rename the dinput8.dll from the folder of the game.


    How To Use
    After the installation the fix does not require any additional treatment. Just launch and configure the game as usual.
     

    Loading Other Fixes/Mods/Injectors
    To increase the compatibility with other fixes, mods or injectors that are also using a dinput8.dll, this fix offers a remote loading feature of additional DLLs. This can be done in two ways:
    File method: The fix DLL will automatically load a DLL that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote.dll. Just rename the DLL file you want to load accordingly. This is the simplest way if you only have a conflict with one additional DLL
    Folder method: The fix DLL will also automatically load all DLL files regardless of their name in a sub-directory that has the same name as itself with the postfix _Remote added to it. For example dinput8_Remote. Just create a folder with the corresponding name in the install directory of the fix. This is the only way to load multiple (conflicting) DLLs

    Note that there might still be compatibility issues between the different fixes, mods or injectors that have nothing to do with the loading process.
     

    Additional Information

    What You Should Know
    This fix is essentially a hack and relies on the layout of the specific executable. There may be crashes or unexpected issues. Feel free to provide feedback so that the problems can get fixed.
     
    Since the fix consists of an executable DLL-File, I could have put any harmful shenanigans in there. You just have to trust me that the file is clean.
     
    If you don't -- and why should you -- feel free to use a meta online virus scanner like VirusTotal to verify the file. Be aware however, that because the fix uses "hacking techniques" such as injection and hooking, it could trigger anti-virus software without being harmful.
     

    Known Issues
    There are currently no known issues with the fix.
     

    Acknowledgments
    I would like to thank Magmarock (Steam/gog), who requested this fix and supported the development.
     

    Contact And Support
    If you like this fix and want to support the development or show your appreciation, you can find more information on my website. There you can also find out more about other fixes that I have done and means to contact me if you have a question, want to provide feedback, bug reports or suggestions.

    34,260 downloads

    7 comments

    Updated

×
×
  • Create New...